ATS Co-Pilot Installation Manual

Text of the manual

ATS Diesel Performance

601-900-2272-INST Installation Manual for 2003 Dodge Cummins Version 3.1 Please read all instructions before the installation of the ATS Co-Pilot Module Thank you for purchasing the ATS Co-Pilot Module Torque converter/exhaust brake controller. This manual is to assist you with your installation and operation of the unit. If

ATS Diesel Performance

601-900-2272-INST Co-Pilot Adjustment The control panel on the face of the ATS Co-Pilot allows the driver to adjust the lockup of the transmission. Keep in mind that the Co-Pilot will only lock the torque converter when enough boost is reached. This keeps the engine from bogging down due to excessively early converter clutch

ATS Diesel Performance

601-900-2272-INST Dip switch selection: --------------------------------------------------------------------------------------------------------------------------------------- Switch #1 If your Dodge’s transmission has a stock valve body flip #1 switch to ON position If your Dodge’s transmission has an ATS valv

ATS Diesel Performance

601-900-2272-INST Co-Pilot Module Mounting Location Find a convenient location to mount the Co-Pilot module with in reach and view of the driver. The Co-Pilot interface must be within visual range of the driver as well as in easy reach. We have found the ideal place to locate the module is just to the right of the driver on

ATS Diesel Performance

601-900-2272-INST Wiring the Co-Pilot The Co-Pilot has several connections that need to be made in order for it to function properly. There are several wires which are optional but still included to give the Co-Pilot a more versatile use depending on your trucks current setup. Use the diagram below as a reference when installi

ATS Diesel Performance

601-900-2272-INST -Red Wire- +12V Power – PIN #1 Reasons for use: The red wire supply’s key on power to the Co-Pilot so it can turn on and be functional. NOT OPTIONAL Locate a Power wire at the vehicles PCM. Tap the Pink/Gray wire that goes to Pin 32 of the C2 PCM Connector (PCM is located on the Passenger side firewall).

ATS Diesel Performance

601-900-2272-INST -Yellow Wire– PCM - PIN #10 and -Blue Wire– TCC - PIN #11 Locate the vehicle’s Torque Converter Clutch (TCC) wire coming from the vehicle’s PCM to the transmission. Cut the Yellow/Light Blue wire that goes to Pin 25 of the C2 Connector. Be sure to leave at least 2 inches of wire coming from the plug

ATS Diesel Performance

601-900-2272-INST View from bottom for 48RE Transmission -Brown Wire (Pin #6) and Purple Wire (Pin #16) is NOT USED in this installation To front of vehicle PRNDL Switch

ATS Diesel Performance

601-900-2272-INST -Gray Wire- Exhaust Brake – PIN #13 If you do not have an exhaust brake, skip this section. Reason for use: This function allows your aftermarket or factory exhaust brake to turn on with the Co-Pilot torque converters lockup when decelerating only. OPTIONAL If you do not have an exhaust brake, leave the Gre

Other Automobile Accessories Manuals