Gate WARFET Operation & User’s Manual

and accidents resulting in the use of this product or the use of Air Electric Gun with the product installed. Information contained in this document is subject to updating without notice. You should program your WARFET before the first use. FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE INSTALLING THE DEVICE THE DEVICE COVER MUST NOT BE REMOVED BY THE USER ...

The symbol shown here means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household and commercial waste at the end of its working life. The Waste of Electrical and Electronic Equipment (WEEE Directive 2012/19/UE) has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment. Purchasers shall take ...

Safety Summary ..............................................................................................................2 Table of Contents .............................................................................................................4 01. Overview ....................................................................................................................5 • WARFET Features ............................... ...

almost 6 million possible configurations. The outstanding Tactical Programming Card provides you with very easy access to the WARFET Power Module settings. Thanks to the Pre-cocking and Smart Trigger functions, you can achieve a trigger response similar to a real gun. The Programmable Burst (1-5 rounds) enables you to fire a pre-determined number of BBs, which is ver ...

• In hardwired installation, WARFET draws the energy from the battery directly to the motor, bypassing the mechanical trigger contacts • Resistant to atmospheric conditions (military specifications: MIL-V-173C) • Deep-drain protection for 7.4V, 11.1V, 14.8V LiPoly and 9.6V, 12.8V LiFePO4 • Improves battery life, ROF, spring life and gearbox reliability The outstanding Tactical Programming Card provides you with ver ...

Supply voltage: Dimensions: Weight: Number of LEDs: Number of buttons: 5-17V 67x53x7mm 27.3g 29 3 07 WWW.GATEE.EU USER GUIDE WARFET ...

easy access to the Power Module settings. All you need to do is connect the Tactical Programming Card between the battery and the Power Module. Tactical Programming Card Victory in the game is often a matter of fractions of seconds. Thanks to the PRE-COCKING, you gain a trigger reaction similar to a real gun. It allows for initial spring compression, which speeds up the trigger ...

save ammunition and increase the realism. You can change AUTO mode to BURST mode or SEMI* mode to BURST mode. If in SAFE/SEMI/BURST mode you release the trigger earlier, you can make one or two shots. The burst time is set in the menu with accuracy to 4ms. The processor actively compensates for the change in burst time with a decrease in the rate of fire due to battery discharging. 3-rd burs ...

LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, the Power Module will not allow firing. Smart Fuse We have developed an electronic fuse with an accur ...

response? Are you planning a power upgrade of your rifle? In that case, you need a MOSFET. It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you gain a higher rate of fire of the rifle and a faster trigger response, and the contacts are protected against burn out. Debouncing This provides full compatibility with the mic ...

draws the power from the battery directly to the motor, bypassing the mechanical trigger contacts. This requires a modification of the AEG installation. Power Module MINI TAMIYA Ready Thanks to the Mini Tamiya Adapters included in kit, you will be able to smoothly connect AEG Control System to your original installation. Printed Quickstart It makes easier starting your adventure with a new product. Th ...

Tactical Programming Card WARFET Power Module Battery Mini Tamiya adapter AEG Mini Tamiya adapter 01 02 03 04 Pair of Deans-T Connectors Single Trigger Wire Double Trigger Wire Quickstart Guide 05 06 07 08 03 04 05 06 07 02 13 WWW.GATEE.EU USER GUIDE WARFET 01 ...

The Programming Card is necessary for proper configuration. The WARFET Power Module is dedicated for users who, for example, have a few guns, and want to use several WARFETs. Therefore, they do need only one Tactical Programming Card for configuration of all their WARFETs. If you have already bought a standard version of WARFET with Tactical Programming Card, and you want to buy one WARFET more, purchasi ...

Step 2. Connect the battery to WARFET Power Module. The LED indicator glows BLUE for one second. WARFET WARNING! CHECK POLARITY! Incorrectly connecting positive and negative battery terminals will cause immediate damage to the unit and it can lead to fire. For your own safety, always use a fuse between battery and WARFET Power Module. BATTERY UP TO 14.8V WARFET AEG Stock Wiring BATTERY UP TO 14.8V AEG Motor C ...

Step 1. Switch mode. To be able to work with Hardwired Installation, necessarily go to chapter 04. (Programming Card usage, p. 18) and switch mode to MODIFIED WIRING. STOCK WIRING MODIFIED WIRING SEMI AUTO SEMI BURST BURST AUTO SEMI AUTO SEMI BURST Step 2. Adapt AEG installation. To adapt the standard AEG installation to work with WARFET Power Module you have to get to the trigger contacts. In case of GB v2 contacts are located i ...

for switch-detection. Now connect the device between the battery and AEG. Do not forget about the trigger wire. Connect it to the top pin. Fig 2. Connection-modification scheme TOP PIN AEG Motor CONTACTS BATTERY UP TO 14.8V single trigger wire ( – provided in the kit) Replacing the existing AEG wiring with high-quality, low-resistance wiring in conjunction with the ...

Fig 4. 50 60 70 80 90 100 SHORT LONG BURST TIME STOCK WIRING MODIFIED WIRING OFF TRIGGER AUTO PRE-COCKING BATTERY PROTECTION ROF CONTROL PRE-COCKING BOOST ACTIVE BRAKE SMART TRIGGER DARK MODE OFF ON OFF ON OFF ON 7.4V 11.1V 14.8V 9.9V 13.2V OFF LESS MORE NEXT LOAD DEFAULT DEMO SEMI AUTO SEMI BURST BURST AUTO SEMI AUTO SEMI BURST PROGRAMMING CARD BATTERY CONNECTOR POWER MODULE CONNECTOR BUTT ...

glows. Check only on the red display. RED ICON Example 1. The glows. Check only on the blue display. BLUE ICON 4. Click and hold button NEXT to watch DEMO. 5. Click button NEXT to switch between functions and displays. 6. Click buttons LEFT or RIGHT to switch options. 7. Click and hold buttons LEFT or RIGHT to switch options more quickly. 8. Before firing, disconnect the Programming Card and connect the WARFET Power Module to the battery. 9 ...

PLEASE NOTE! Making changes in Active Brake, Smart Trigger, ROF Control or BURST TIME settings might result in necessity of re-adjustment of Pre-cocking Boost. Therefore, Pre-cocking Boost settings should be exercised as the last step of WARFET configuration. Instructions: 1. Switch ccording to Card usage” (p.18). Pre-cocking to Trigger mode a ”04. Tactical Programming 2. onnect WARFET to your AEG according to . Switch ...