FEIYUTECH G5 Quick Start Manual

Text of FEIYUTECH G5 Quick Start Manual

Note: There are beep alerts when

power on/off Double tap Function Trigger Button Trigger button Explanation Lock Mode Panning Reset Long press Enter the lock mode, release it to return to before mode Restore the initial follow state of the panning Function button

Four times clicks on function button, gimbal will access

the autorotation mode setting. Manually turn the gimbal to an initial position, then click again on function button for recording it.Manually turn the gimbal to end position, then click the functionbutton again for recording it. Gimbal will turn to the initial position and begin autorotation. 2. Turn the panning axis and tilting axis to the position ① and hold for half a second. Click on function b

Manual lock ,pull to the specified angle to stay half a

second can be lock the current angle.(The tilting axis and panning axis in the lock mode can be manual lock and the tilting axis can be manual lock in the panning mode.)Take the tilting axis as an example: Hold the camera and change its angle in tilting axis direction. Keep this position for half second, the current angle will be locked manually. gimbal speed setting reference table

FEIYUTECH Lawn Mower Accessories Owners Instructions: