Argos Boston Basic Modular 2 609/0069 Assembly Instructions Manual

Text of Argos Boston Basic Modular 2 609/0069 Assembly Instructions Manual

Assembly Instructions - Please keep for future reference

Dimensions Width - 60cm Depth - 30cm Height - 60cm 609/0069 Boston Basic Modular 2 Half Door 610/8937 609/2610 Important - Please read these instructions fully before starting assembly Version 3 Date: 19/03/15 If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 6400800 413/6815 414/1941

Note: if required the next

page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference. Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on the following pages. • Remove all fi ttings from the plastic bags and separate them into their groups. • Keep children and animals away from

Vertical support x 2

(29.4 x 27.65cm) 4 Back panel x 2 (29.5 x 59.6cm) 5 Door panel x 2 (27.1 x 27.1cm) 6 Pilot holes for guidance only Pilot holes for guidance only Top/Bottom panel x 2 (60 x 29.5cm) 1 Side panel x 2 (56.9 x 29.4cm) 2 Shelf (56.9 x 29.4cm) 3 Components - Panels Please check you have all the panels listed below If you have damaged or missing components, call the Customer Helpline: Argos = 0345 6400800

Note: The quantities below are the correct amount to complete the assembly. in some cases mor

may be supplied than are required. Components - Fittings I 50mm Dowel x 2 F Nail x 20 B Handle x 2 40mm Screw x 8 E 25mm Screw x 2 A Metal plate x 2 C D Door hinge x 4 G Door stopper x 2 H 30mm Dowel x 8 12mm Screw x 6 J K Screw cover x 4 Ruler - Use this ruler to help correctly identify the screws Tools required 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80

Attaching metal plates

& door hinges 4 Metal plates onto the Door panels . Insert the Door hinges into the Door panels . G 6 C D 6 6 D D G C Door stoppers onto the Vertical supports . G H 4 4 G H X 2 X 2 Finished front edge G H

Attaching the side

panels a: supports onto the Shelf . 4 3 4 3 I I 4 4 3 3 2 2 5 a: b: 2 b: Fix the 3 J J J J J J J J Finished front edge Finished front edge Finished front edge p onto the Shelf . I Insert Dowels into the Shelf and Vertical J supports .

a: Carefully locate the Door

panel onto the unit, aligning the Door hinges with the corresponding holes. Bottom panel onto the unit. 6 1 Note: Note: Ensure the Door hinges are aligned with the corresponding holes. E Carefully locate the Door panel onto the unit, aligning the Door hinges with the corresponding holes. Top panel onto the unit. 6 1 Ensure the Door hinges are aligned w

Attaching the handles

A A Handles onto the Door panels . A B 6 6 6 back surface 2 1 Fixing back panel Attach Back panels onto the unit using Nails . 5 F Important: The unit MUST be ‘square’ when back is attached.

Assembly is complete.

Finishing the unit With help, place the unit in the intended position. Note: It would be useful to ask someone to help you at the stage. Step 8 K K K K Use Screw covers to cover the screw heads. K Attaching the screw covers 7 If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 6400800

Argos Indoor Furnishing Owners Instructions: