Coolmax CD-320 Operation & User’s Manual

Text of Coolmax CD-320 Operation & User’s Manual

1 Introducing the CoolMax CD-320

Product Overview The CoolMax CD-320 is available from leading storage partners in pre-configured set-ups with eSATA host connections; some also include USB host connections. Simply open the box and connect the appliance with an appropriate host cable; it’s that simple. The CoolMax CD-320are available in four different configurations, each offering a different subset of features and capabilities, as shown in the following

• Plug-and-play functionality

• Virtualization capabilities (to map the physical hard drives to virtual volumes) • Cascading • Automatic disk rebuild (when one or more SAFE volumes are configured) • Drive Locking (Data Security) • Backup Button The SteelVine Manager software includes a graphical user interface (GUI) for Windows, Macintosh and Linux operating systems that allows you to configure, manage, and monitor the CoolMax CD-320, hard disk

chained hierarchy structure, you can increase the total storage capacity of your system. For more

information refer to CoolMax Storage Policies on page 6 and Cascading on page 12. SATA Features The CoolMax CD-320 provides the following Serial Advanced Technology Attachment (SATA) features: • Automatic negotiation between SATA I (1.5Gbps) and SATA II (3.0 Gbps) • Serial ATA 2.5 specification compliance (Gen2m) • Serial ATA Port Multiplier 1.1 specifi

This mode allows you to use the CoolMax CD-320 with the device’s LEDs to indicate status,

without using the SteelVine Manager GUI software. To select a storage policy in this mode the first time that a new factory-shipped product is used, ensure that the hard disk drives are installed, set the rotary switch on the back of the CoolMax CD-320 to the desired Storage Policy (not the GUI selection) and turn on the power. To change the st

it were a single physical drive. This virtualization allows you to overcome restrictions that are

imposed by physical hard drives, such as speed, storage capacity or data storage reliability. BIG The BIG storage policy concatenates a series of physical hard drives as a single large volume; resulting in a seamless expansion of virtual volumes beyond the physical limitations of singularly connected hard drives. CoolMax CD-320 BIG storage policy delivers ma

nodes. Even though you can use the rotary switch to select JBOD mode for any node in a

cascaded configuration, only the first JBOD volume of any subordinate node is detected by your host. Therefore, selecting JBOD mode for any subordinate node is not recommended. In a JBOD configuration, the CoolMax CD-320 directly exposes each physical drive. Figure 3 - JBOD storage policy sample configuration FAST The FAST storage policy distributes access across all h

Coolmax Enclosure Owners Instructions: