CRU Dataport 25d Install Manual
Text of the manual
Mounting a Hard Drive in the Carrier
1. Remove the two screws from the back of the carrier. Slide the metal cover off.
2. Connect the hard drive to the connector in the carrier and use the four screws
provided to mount the hard drive.
3. After the drive has been installed, slide the cover over the drive mounting chassis and insert the two screws in the
rear
Rugged, Reliable, Mobile, Secure
TM
1-800-260-9800
www.CRU-DataPort.com
DataPort
™
REMEMBER, partitioning the drive will require the
drive be formatted and formatting will result in loss
of all data on the hard drive.
• This will bring up the Create Partition Wizard
screen.
• Follow the instructions and the drive will be ready
for use.
For Macs:
If the