Aqualuma TRIM TAB LIGHT Fitting Instructions

Limited Warranty (Please pass on to the vessel owner) Aqualuma warrants all of its product range with a Three (3) year warranty to be free of defects in workmanship and materials. Aqualuma warranty will be deemed void if the product is improperly maintained or as a result of misuse, neglect, improper installation or natural disasters such as fl ood, fi re, lightning or unauthorized repairs or modifi cations. Aqualuma will replace at its option any product or part free of charge upon return of the defective item and will pay for return freight within warranty period. Aqualuma’s liability in all c ...

All Aqualuma lights have been tested before shipping. It is recommended that you use a qualifi ed boat builder to work out placement and fi tting of your new underwater lights. You will require the following to install your new Aqualuma lights: - 6 mm/1/4’ drill, 5 or 6 cable/zip ties and a Fuse or Circuit Breaker Step 1 With boat on hardstand or trailer work out where to fi t light unit to Trim tab or angle bracket and mark hole centres as set out below. Standard Trim Tab Light Step 2 Drill the 2 holes required to mount the unit to the Trim Tab or Bracket. Step 3 Using the 2 nylock nuts and bolts supplied attach the uni ...