Aqua Technopool pH-Rx Installation Manual

Text of Aqua Technopool pH-Rx Installation Manual

MANUALE DI INSTALLAZIONE

pg 14 MANUEL D’INSTALLATION ET D’ENTRETIEN pg 26 MANUAL DE INSTALACIÓN pg 37 BEDIENUNGSANLEITUNG pg 49

The aim of the manual is to provide you with all the necessary information for a proper

installation and maintenance in order to give you optimum results whilst in operation. For this reason it is really important reading with attention the instructions given below since they furnish all the indic

of the plant it’s necessary to install the pump under the level of the chemical, you

need to use an injection valve or an anti siphon valve. ♦ Do not install the pump over the tank in presence of liquids that emanate fumes unless it ♦ is hermetically closed. 2.2 Electrical characteristics Power supply: 230 VAC 50/60 HZ 2

2.6 Accessories construction

Electrode assembly : Put off the cap of the electrode (Fill the cap with ¾ of water to store the electrode) Assembly the electrode respecting the order of the pieces shown in the central figure. Insert the electrode into the electrode holder “j” pushing and rotating to the left and right. W

3.0 Technopool Programming

The Technopool programming is divided into 2 menu: User Menu and Installation Menu Press F to scroll User menu. Press Up-Down to change values. Press Enter to confirm setting values. Keep Pressed Enter to enter the Installation menu (password will be required) 3.1 User menu User Menu is suitable

3.2 Installation Menu

Installation menu allows to set all the paramters of your Technopool. To enter Installation menu keep pressed enter botton for more than 3 seconds (password will be required, default password is ) ) The menu is divided into sub menu: You can scroll the menu with F button,

Aqua Lighting Equipment Owners Instructions: