Aptiv IC-CPD Operation & User’s Manual
Text of Aptiv IC-CPD Operation & User’s Manual
Electric Vehicle Charging Equipment IC-CPD
(In-Cable Control- and Protection Device)
CHARGING
TEMPERATURE
POWER
FAULT
Version 1.0 / 1906
Online User Manual IC-CPD / 35383918
User Manual – Electric Vehicle Charging Equipment IC-CPD
2
Version 1.0 / 1906
Contents
Abbreviations
1. General information
Electric Vehicle Charging Equipment IC-CPD
1. General information .............................. 2
2. IC-CPD charging equipment overview ... 3
3. Warnings, symbols
and pictograms used ............................ 4
4. Safety instructions ................................ 6
5. Main features .............................
User Manual – Electric Vehicle Charging Equipment IC-CPD 3
Version 1.0 / 1906
A Vehicle charging inlet
B Vehicle connector ( page 11)
C Control box (ICCB)
D AC power cable
E Power plug
F Grid socket
G Front display with LEDs ( page 14)
H Back label ( page 17)
CHARGING
TEMPERATURE
POWER
FAULT
2. IC-CPD Overview
For the definition of the individual system
components refer to the overview below.
A
IC-CPD
(In-Cable Control- and Protection Devic
User Manual – Electric Vehicle Charging Equipment IC-CPD 4
Version 1.0 / 1906
3. Warnings, symbols and pictograms used
DANGER
Indicates imminent danger.
Failure to follow this instruction will
result in death or serious injury.
Indicates a possibly impending danger.
Failure to follow this instruction can
result in death or serious injury.
WARNING
Indicates a dangerous situation.
Failure to follow this instruction can
result in light or minor injury.
C
User Manual – Electric Vehicle Charging Equipment IC-CPD 5
Version 1.0 / 1906
Instruction:
Follow instructions
Warning:
Electric voltage
Warning:
Hot surface
Warning:
Obstacles on the ground
Prohibition:
No direct sunlight,
no direct cover
Prohibition:
Do not kink the cable
Pictograms
Prohibition:
Do not run over plug,
control box and cables
Prohibition:
Do not use the IC-CPD
if it is damaged
Prohibition:
Do not unplug the power plug
during the charging
User Manual – Electric Vehicle Charging Equipment IC-CPD 6
Version 1.0 / 1906
4. Safety instructions
Incorrectly installed sockets
can lead to electric shock
or fire when charging the
high-voltage battery via the vehicle
charging inlet.
• Operate the IC-CPD charging
equipment in properly grounded
power networks only
• The grid socket used for charging
must be connected to a protected
circuit that complies with local laws
and standards
• The soc
User Manual – Electric Vehicle Charging Equipment IC-CPD 7
Version 1.0 / 1906
• Do not perform any modifications or
repair tasks to electrical components
and do not open the device
• Do not touch the contacts on the
vehicle charging inlet and the IC-CPD
charging equipment
• Keep sockets, plug connection and
the IC-CPD charging equipment free
of moisture, water, snow, ice and other
liquids. Never immerse in water
• Disconnect the IC-CPD chargi
User Manual – Electric Vehicle Charging Equipment IC-CPD 8
Version 1.0 / 1906
• Do not run over plug, control box or
cables
• Do not exert any unusual mechanical
strain on the IC-CPD
• Do not operate the IC-CPD charging
equipment outside the permissible
ambient temperature range from
-22 °F (-30 °C) to 122 °F (+50 °C).
Lower or higher temperatures can
damage the device
• Do not attempt to connect not-
matching vehicle connectors and
charg