APsmart RSD-S-PLC Installation & User Manual

TRANSMITTER-PLC/TRANSMITTER-PLC ALTENERGY POWER SYSTEM INC. www.APsmartGlobal.com © All Rights Reserved APsmart rapid shutdown system RSD-S-PLC Rev1.0 2020/03/18 ...

This manual contains important instructions to be followed during installation and maintenance of the APsmart RSD and Transmitter. To reduce the risk of electrical shock and ensure the safe installation and operation of the APsmart RSD and Transmitter, the following symbols appear throughout this document to indicate dangerous c ...

· Executes rapid shutdown of system · Meets SunSpec requirements 2 when Transmitter-PLC signal is absent RSD-S-PLC meets SunSpec requirements,maintaining normal function by continually receiving a heart-beat signal from the APsmart Transmitter. The RSD executes rapid system shutdown when Transm ...

① RSD-S-PLC ② Transmitter-PLC (integrated in CPS 25/50/60kW inverter APS RSD wire-boxes) ③ Inverter The APsmart Rapid Shutdown System Transmitter-PLC is part of a rapid shutdown solution when paired with APsmart RSD-S-PLC, a PV module rapid shutdown unit. While powered on, the Transmitter-PLC sends a signal to the RSD-S-PLC units ...

① Perform all electrical installations in accordance with local codes. ② Be aware that only qualified professionals should install and/or replace the RSD-S-PLC. ③ Before installing or using an RSD-S-PLC, please read all instructions and war ...

Buckle RSD-S-PLC on the PV module frame. DC input - DC input + DC output - DC output + Mounting brackets A. Front buckle B. Back buckle Note: Both installations can be installed anywhere on the PV module frame. 7 ...

output port of the RSD-S-PLC and connect the input port to the junction box. Step 3: Connect the RSD-S-PLC serially connected output to the inverter with a self-made DC extension cable. self-made DC extension cable GRID DC 1 DC 2 DC 1 DC 2 DC Switch COM GRID Input- Output- Inpu ...

• Connect DC leads from power supply to Transmitter-PLC • Connect single/dual core(Core 1 and Core 2) to Transmitter-PLC No Note: If there is only one core need to connect, please connect Core 1 first. te: Install RSD-S-PLC before powering on Transmitter. Place rapid shu ...

s 30 modules C 150A v v 3300ft (1000m) V- V+ N L V - C US 259077 smart ...

Input Operating Voltage Range Output Operating Voltage Range 8-80V 8-80V Maximum Cont. Input Current (Imax) 15A Maximum Input Power 800W Output Data (DC) Output Power Range ...