Best ACES 2 Operation & User’s Manual

Important Safety Information This manual may not be altered or reproduced in whole or in part by any means without the express written consent of Best Energy Saving Technology Ltd. The information contained in this document is believed to be accurate at the t ...

Considerations When Installing the ACES 2 Installation of the ACES2 must be performed by qualified personnel only, who follow standard safety precautions through the installation procedures. Those personnel should have appropriate training and experience of A ...

ACES2 Description The ACES2 enhances your energy management with automated intelligence, by fixing your aircon temperature to desired value (no one can alter the settings via remote) and scheduling your multiple aircon systems on or off depending on the time ...

The Hardware ACES2 is a plug-and-play system, easily and safely installed by an electrician. It offers the chance to transform energy management in a facility with automated intelligence that switches your energy hungry Aircon systems equipment on and off aut ...

ACES 2 Identification ...

Note: The Relay circuit board has the numbers identification printed on the board. ...

ACES2 Tools and Consumables Tools: 1) Screwdriver set including a 2mm flat head screwdriver. 2) Wire strippers 3) Wire cutters 4) RJ45 Crimpers 5) Multimeter (for resistance measurements 0 – 50k) 6) Drill and Masonry drill set ...

7) Ferrule crimping tool 8) Cat5 tester 9) Accurate/calibrated portable temperature probe Consumables: 1) RJ45 connectors 2) CABLE - 2 wire 26AWG or larger signal cable for each aircon control. 3) CABLE - 3 wire SCREENED 26AWG or larger Cable for Temperature ...

4) Screws and raw plugs for mounting ACES2 to wall. 5) 0.5 (20 AWG, 0.5 mm²) and 0.25 (26 AWG, 0.25 mm²) 6) Electrical Tape 7) Terminal block (CH2 Spring Wire Connectors for instance) 8) Diode 1N5817 9) Optional: Connector Plug, Pins and crimper (Usually JS ...