Remcor SID650A/80 Operator's Manual

Text of the manual

220V, 60HZ, 1PH

SPIRAL ICEMAKER DISPENSER PRINTED IN U.S.A  REMCOR INC: 1995 Part No. 91704 August, 1995 THIS DOCUMENT CONTAINS IMPORTANT INFORMATION This Manual must be read and understood before installing or operating this equipment Distributed By: Com

TABLE OF CONTENTS

Page GENERAL INFORMATION 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INSTALLATION INSTRUCTIONS 2 . . . . . . . . . . . . . . . . . . . . . . . . . . .

TABLE OF CONTENTS (cont’d)

Page LIST OF FIGURES FIGURE 1. ELECTRICAL WIRING INSTALLATION INSTRUCTIONS 3 . . . . . . . . . FIGURE 2. INSTALLATIONS DIMENSIONS 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FIGURE 3. MOUNTING TEMPLATE MODEL SID650-80 5 . . . . . . . . . . . . . . . . . . . . FIGURE 4. BEVERAGE SYSTEM SCHEMATIC B MODE

The Remcor S.I.D. (Spiral Ice Maker/Dispenser) is a unique, self-contained, counter top style unit that automati-

cally makes hard, clear cube quality ice and stores it in a sealed hopper for sanitary dispensing. The ice is made by a new, patented process on a spiral-shaped, stainless steel evaporator and produces true

With the unit upright, carefully remove the shipping crate. Inspect for shipping damage and report any such

damage to the shipper immediately. 2. Unlock and open the hinged service door on the upper left side panel. 3. Remove shipping tape from the ice drop cover, storage hopper cover, water float v

IMPORTANT: To ensure proper ice maker operation and also to reduce the frequency of water-related

service problems, a water filter should be installed. Remcor recommends the use of IMI Cornelius filter, model number 81COR01PS. For specific recommendations on these filter systems for your local conditions, consult with a distributor in your area or co

AIR DISCHARGE GRILL

CONDENSER WATER OUT 3/8-NPT (WATER COOLED ONLY) CONDENSER WATER IN 3/8-NPT (WATER COOLED ONLY) ELECTRICAL INPUT ACCESS PANEL FOR SERVICE AND BEVERAGE HOOK- UP *3/4-FPT DRAIN (2) *ICEMAKER WATER IN 1/4 O.D. TUBE COMP. FITTING 22 16 1/4 12 3 1/2 9 28 3/4 12 17 5/8 29 1/4

UNIT OUTLINE FRONT

3/8 DIA. 4 PLACES 1- 29/32-IN. 1 -5/8-IN. NOTE: SHADED AREA INDICATES OPENING IN CABINET BOTTOM FOR BEVERAGE TUBING FOR --B, --BC MODELS ONLY FIGURE 3. MOUNTING TEMPLATE MODEL SID650-80

“B”models contain beverage faucets only and must be supplied with cold product from any remote cold plate or

refrigerated soda factory. “BC”units have a built-in cold plate, in addition to the beverage faucets and are de- signed to be supplied direct from syrup tanks and carbonator with no additional cooling required. Installa

Other Ice Maker Manuals