Aparton FT-A1 Operation & User’s Manual

HEAT DETECTORS The detectors comply with EN 54-5:2003. Compliance of the detectors with the type and class appear in Table 1. Table 1 Model Type EN 54-5:2003 class FT – A1 heat detector Fixed temperature �1 FT – A2 heat detector Fixed temperature �2 FT – B heat detector Fixed temperature � The f ...

Name Quantity Note Heat detector FT – A1 (FT – A2) (FT – �) Up to 100 pcs Manual 1 pc. Per a package Package 1 pc. Per 100 pcs MUSH-2 or MUSH-3 modules can be supplied for connection with a 4-wire CP if ordered separately. 4 PLACEMENT AND INSTALLATION 4.1 You should choose places to locate detectors where there ar ...

installation, timely maintenance, transportation and storage of detectors have been kept. 7.3 In the case that faults according to the reclamation have been removed the guarantee term is prolonged for the while detectors were not in use because of faults. Fig ...

Contacts «1», «2», «3», «4» are marked on the base and on PCB of the detector. Resistors value is specified by control panel manufacturer. Feasible values: 24V: EOL resistor= (2,4-3,9) kOhm, CLR=(0,68-3,6) kOhm 12 V: EOL resistor = (1,2-2) kOhm, CLR =(0,1-1,5) kOhm Figure 4 WIRING DIAGRAM TO AC CONTROL P ...

THROUGH MUSH-2 MODULE EOLRAL (from 1 to 5 kOhm) and CLRAL (from 2 to 15 kOhm) are specified by control panel manufacturer. EOL resistor = 1,5 kOhm. Figure 6 WIRING DIAGRAM FOR CONNECTION OF DETECTORS TO 4-WIRE DC AL THROUGH MUSH-3 MODULE EOLRAL and CLRAL (from 1 to 5 kOhm) are specifi ...