Datecs Zebra PD20 Operation & User’s Manual
Read Online
Read the Datecs Zebra PD20 Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
USER MANUAL UM 07.01.31/v1.4.0 2 THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM DATECS LTD. Ad ...
USER MANUAL UM 07.01.31/v1.4.0 3 REVISION HISTORY Version Data Change description 1.0.0 08.01.2021 First Release 1.1.0 31.03.2021 Added PD20 1.2.0 16.04.2021 Updated “TECHNICAL SPECIFICATIONS” 1.3.0 28.0 ...
USER MANUAL UM 07.01.31/v1.4.0 4 CONTENTS REGULATORY ............................................................................................................................................................. ...
USER MANUAL UM 07.01.31/v1.4.0 5 REGULATORY FCC ID: YRW-PD20 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits a ...
USER MANUAL UM 07.01.31/v1.4.0 6 TECHNICAL SPECIFICATIONS Processor ARM Cortex® M3 Security Microcontroller Memory 64KB Internal ROM 256KB Internal RAM 1MB Internal Flash Application Memory 4MB Serial Flash Ke ...
USER MANUAL UM 07.01.31/v1.4.0 7 GENERAL VIEW Figure 1 ...
USER MANUAL UM 07.01.31/v1.4.0 8 1. LEDs indication for Contactless transaction / LEDs indication for device status 2. Mounting insert 1 3. Rear Pads (USB and charging) 4. Contactless reader 5. On/Off button (B ...
USER MANUAL UM 07.01.31/v1.4.0 9 GETTING STARTED PD20/PD20-1 has rechargeable Li-Po battery. Can be charge from USB port or Rear pads. Before first use, battery must be fully charged. If the device is fully dis ...
USER MANUAL UM 07.01.31/v1.4.0 10 PERIODIC INSPECTION AND MAINTENANCE The following inspections must be performed on a regular basis after initial receipt and installation of PD20/PD20-1: • There are no visua ...
USER MANUAL UM 07.01.31/v1.4.0 11 OPERATION MODES For start operating with PD20/PD20-1 needs to be paired to another Bluetooth BLE device with installed application. For downloading the latest SDKs for iOS, An ...
USER MANUAL UM 07.01.31/v1.4.0 12 LED indication Description Device operating No indication Device is turned off No indication (Depends of Application) Device is turned on System errors After power on the devic ...
USER MANUAL UM 07.01.31/v1.4.0 13 Bluetooth Pairing Turn on PD20/PD20-1, connect it to PC via USB cable. When device is connected to PC, will create virtual COM port. Check on device manager on which port is co ...
USER MANUAL UM 07.01.31/v1.4.0 14 Figure 7 ...
USER MANUAL UM 07.01.31/v1.4.0 15 Magnetic cards reading The PD20/PD20-1 has a built-in magnetic card reader. The card reader incorporates a (3) track magnetic read head, requiring a single swipe to read field ...
USER MANUAL UM 07.01.31/v1.4.0 16 Contactless cards reading The contactless card transaction procedure can vary depending on the application loaded on the PD20/PD20-1. Verify the proper procedure with your appl ...
USER MANUAL UM 07.01.31/v1.4.0 17 Smart cards reading The smart card transaction procedure can vary depending on the application loaded on the PD20/PD20-1. Verify the proper procedure with your application prov ...
• Keep the PD20/PD20-1 side of the reach of small children. • Keep the PD20/PD20-1 dry. Precipitation, humidity and liquid contain minerals that will corrode electronic circuits. • Do not use or store in dusty or dirty areas. • Do not drop or knock PD20/PD20-1. • Do not open the PD20/PD20-1. Only qualified personnel can open the device and make repair. I ...
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications ...
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES‐3 (B) ...
