Bender VMD420-DM Manual 

Text of Bender VMD420-DM Manual 

Voltage and frequency monitor

for monitoring of 3(N)AC systems up to 0…500 V for undervoltage and overvoltage and under and overfrequency Software version: D238 V2.2x VMD420-DM_D00227_01_M_XXEN/07.2015

Bender GmbH & Co. KG

Londorfer Str. 65 • 35305 Gruenberg • Germany Postfach 1161 • 35301 Gruenberg • Germany Tel.: +49 6401 807-0 Fax: +49 6401 807-259 Email: [email protected] www.bender.de © Bender GmbH & Co. KG All rights reserved. Reprinting only with permission of the publisher. Subject to change! Photos: Bender archives

Table of Contents

3 VMD420-DM_D00227_01_M_XXEN/07.2015 1. How to use this documentation effectively ................................................ 5 2. Safety .................................................................................................................. 7 2.1 General ....................................................................

Table of Contents

4 VMD420-DM_D00227_01_M_XXEN/07.2015 4.3 Wiring of the device ..................................................................................... 18 4.4 Commissioning preset function/factory setting ................................ 19 5. Operation and setting ...............................................................................

1. How to use this documentation effectively

This manual is intended for experts in electrical engineering and electronics! In order to make it easier for you to find specific text passages or references in this manual and for reasons of comprehensibility, important information is emphasized by symbols. The meaning of th

Bender Measuring Instruments Owners Instructions: