AGI NECO D1660 Assembly Manual

follow instructions and safety precautions can result in serious injury, death, or property damage. Keep manual for future reference. Part Number: 7713397 R2 Revised: June 2021 Original Instructions Continuous-Flow Grain Dryer COMMANDER Control Assembly Manual This manual applies to following models: D1660, D1670, D1680, D1690, D16106, D16120, D16140, D16160 D24108, D24150, D24180, D24210, D24240, D24260, D ...

The following changes have been made in this revision of the manual: Description Section Modified the manual format. All sections Removed the 12’ Models. Various sections Updated the table for level auger. Section – Roof with Level Auger on page 38 Updated the HMI wiring connections. Section 4.7.10 – HMI Wiring Connections on page 90 Updated the leg layouts. Section 5.4 – Utility Layout and Weight Load Points on page 104 ...

7713397 R2 5 CONTENTS 1. Safety....................................................................................................................................................... 7 1.1 Safety Alert Symbol and Signal Words...................................................................................... 7 1.2 General Safety.............................................................................. ...

6 7713397 R2 4.5.2 Assembly Hardware Key........................................................................................... 36 4.5.3 Roof Systems ............................................................................................................ 37 4.5.4 Catwalk and Safety Cage Assembly ......................................................................... 44 4.5.5 Safety Cage Assembly . ...

This safety alert symbol indicates important safety messages in this manual. When you see this symbol, be alert to the possibility of injury or death, carefully read the message that follows, and inform others. Signal Words: Note the use of the signal words DANGER, WARNING, CAUTION, and NOTICE with the safety messages. The appropriate signal word for each message has been selected using the d ...

• Do not overheat grain or operate the dryer temperature too high. Keep the maximum plenum temperature not more than the maximum set point temperature. • Be cautious of spontaneous combustion when working with oil seeds. • Grain dust is a fire hazard. Keep all areas (including areas under the perforated floors) free from dust and fines. • Clean out the dryer after using to remove grain dust, husks, and other mat ...

If You Smell Gas: • Turn off gas at the source if possible. • Do not try to light or relight any appliance. • Extinguish any flames and remove any sources of ignition from the vicinity of the bin. • Do not touch any electrical switch. • Evacuate all personnel from the vicinity of the source of the smell. • Immediately call your gas supplier. Follow the gas supplier’s instructions. • If you cannot reach you ...

The grain dryer is not intended for transport on public roads. If it requires transport on a public roadway, the following steps should be taken: • Check with local authorities regarding transport on public roads. Obey all applicable laws and regulations. • Always travel at a safe speed, never exceeding 20 mph (32 km/h). • Reduce speed on rough surfaces. • Do not transport on slopes greater than 20°. • U ...

Power Source • Electric motors and controls shall be installed and serviced by a qualified electrician and must meet all local codes and standards. • Do not modify the magnetic starter. This component provides overload and under-voltage protection. • Motor starting controls must be located so that the operator has full view of the entire operation. • Locate main power disconnect switch within reach from gro ...

Fall Protection • Use a fall arrester or fall restraint when climbing or working at heights. 1.11. Safety Equipment The following safety equipment should be kept on site. Fire Extinguisher • Provide a fire extinguisher for use in case of an accident. Store in a highly visible and accessible place. First-Aid Kit • Have a properly-stocked first-aid kit avai ...

Replicas of the safety decals that are attached to the grain dryer and their messages are shown in the figure(s) that follow. Safe operation and use of the grain dryer requires that you familiarize yourself with the various safety decals and the areas or particular functions that the decals apply to, as well as the safety precautions that must be taken to avoid serious injury, death, or damage. Figure ...

079338 (CSA Only) 035690 035690B (Inside) 036737 079337 (CSA Only) Figure 4. Auger Unload Safety Decal Locations 036737 079337 (CSA Only) 035690 079338 (CSA Only) 1001985 Figure 5. Door Safety Decal Locations 079338 (CSA Only) One decal per door, including cleanout doors 1. SAFETY CONTINUOUS-FLOW GRAIN DRYER – COMMANDER CONTROL ...

036726 CUTTING HAZARD To prevent serious injury, keep away from blade when fan is operating. Shut off and lockout or disconnect power before inspecting or servicing. Keep guards in place while operating. WARNING 035691 To prevent serious injury or death, turn off and lock out power before servicing. HIGH VOLTAGE WARNING 036725 To prevent serious injury or death, turn off and lock out power before servicing. HIGH ...

079338 To avoid injury from moving parts, disconnect power to the equipment before (removing, opening) this (cover, door). WARNING Pour eviter les blessures attribuables aux pieces mobiles debrancher l’appareil avant (de retirer, d’ouvrir) (ce couvercle, cette porte). AVERTISSEMENT 079339 If the information in the manual is not followed exactly, a fire or explosion may result causing property damag ...

dryer. 2.1. General Design Criteria Note Grain dryer design is based on load factors. If you wish to add more sections to your dryer in the future, please let NECO know when you place your order so it will be designed to fit to your expanding needs. 2.1.1 Tier Information • A tier is a set of parts that make up ONE layer of the dr ...

The dryer model number provides information on the dryer length and capacity. • The two digits after “D" are the dryer length. • Multiply the remaining digits by 10 to determine the approximate bushel capacity for corn. In this example: 40 x 10 = 400 bushels Example: D 16 60 • 16 indicates this model is a 16 foot long dryer • 60 indicates this model has a capacity of 60 x 10 = 600 bushels Using the same proc ...

Important Understanding the terms used to identify the various components of a dryer system will make the instructions in this manual clearer and easier to follow. Figure 8. Front of Dryer (from Fuel Train Side) MAIN CONTROL BOX CATWALK BLOWER HOUSING FUEL TRAIN PLATFORM BURNER CONTROL DRYER SECTION (Each has a blower system) BOX UNLOAD MOTOR (Auger unload shown) SAFETY CAGE DRYER TIER LADDER SYSTEM LEVEL OF PLENUM DIVIDER ...

METERING ROLL DRIVE CHAINS METERING ROLL DC MOTOR UNLOAD DRIVE GUARD (Shown in Open Position) COOLING FLAP HANDLE & LOCK (Optional) TRANSITION HOUSING BELT SHIELD BURNER HOUSING UNLOAD DRIVE METERING ROLLS BLOWER HOUSING 2. FEATURES CONTINUOUS-FLOW GRAIN DRYER – COMMANDER CONTROL ...