Datalogic Matrix 120 Operation & User’s Manual

Manuals+ User Manuals Simplified. DATALOGIC Matrix 120 User Guide Home » DATALOGIC » DATALOGIC Matrix 120 User Guide Contents [ hide 1 DATALOGIC Matrix 120 2 INSTALLATION PROCEDURE 3 Mounting 4 Electrical Connections 4.1 I/O Connections 5 Connector Pinouts 6 CONFIGURATION 6.1 Installing DL.CODE 7 TECHNICAL FEATURES 8 PATENTS 9 LASER SAFETY 10 File Downloads 11 References 12 Related Manuals

Datalogic provides several services as well as technical support through its website. Log on to www.datalogic.com. For quick access, from the home page click on the search icon , and type in the name of the product you’re looking for. This allows you access to download Data Sheets, Manuals, Software & Utilities, and Drawings. Hover over the Support & Service menu for access to Services and Technical Support. INSTALLATION PROCEDURE 1. Using a 2.5 mm hex key, set the Focus Adjustment Screw to one of the three pre-calibrated distances according to your application. 2. Physically mount the Matrix 120 reader. 3. Make the necessary electrical connections. 4. Configure the reader using the X-PRESS interface (AIM, SETUP, LEARN and TEST for simple configuration) or the DL.CODE software configuration program (complete configuration). HMI X-PRESS™ INTERFACE In normal operating mode the colors and meaning of the five LEDs are illustrated in the following table: READY (green) indicates the device is ready to operate. GOOD (green) confirms successful reading. TRIGGER (yellow) indicates the status of the reading phase. COM (yellow) indicates active communication on main serial port. STATUS (red) indicates a NO READ result.

immediate access to the following relevant functions: Test Mode with bar graph visualization to check static reading performance. Focus (Aim) turns on the laser LED to aim the reader at the target. The target should be placed 8 mm to the left and centered vertically with respect to the aiming pattern (cross). Setup to self-optimize and auto-configure photometry parameters. Learn to self-detect and auto-configure for reading an unknown barcode (by type and length). Only one symbology type can be saved using this method. Performing Autolearn on a second symbology will overwrite the first one.

2. Power On LED 3. Ethernet Connection LED 4. Mounting Holes (4) 5. Aiming System Laser Source 6. Lens 7. Good Read LED Green 8. Internal Illuminators 9. Focus Adjustment Screw 10. Ethernet Cable 11. Power-serial- I/O Cable Mounting 1. To mount the Matrix 120, use the mounting bracket to obtain themost suitable position for the reader. Common mounting configurations are shown in the figures below. Electrical Connections

CAUTION: When Matrix 120 is connected to the CBX connection box through CAB-1011, Inputs and Outputs become opto-isolated and maintain the polarity significance of the CBX signals. To function correctly, they all require setting the respective Line Type configuration parameters to NPN. The hardware connection to the CBX can be either NPN or PNP The electrical features of both inputs at the CBX are: VAB = 30 Vdc max. IIN = 12 mA (CAB-1011) + 12 mA (CBX) max. The following connections refer to Datalogic sensors.

CAUTION: If output devices are powered externally (separate from Matrix 120 power), it is always advised to maintain the same voltage levels used for the Matrix 120 device

Ethernet Pin 1 = TX+ 4 3 1 2 Pin 2 = RX+ Pin 3 = TX- Pin 4 = RX-

cables. 17-pin Name Function 9** O1 Output 1 (referenced to GND) 8** O2 Output 2 (referenced to GND) 6 IN1 External Trigger (referenced to GND) 13 IN2 Input Signal 2 (referenced to GND) 7 USB+ USB Data + (only for USB models) 15 USB- USB Data – (only for USB models) 1 Vdc Power Supply Input Voltage + 2 GND Power Supply Input Voltage – 5 – Reserved 3, 4, 14, 16 NC not connected Shield Cable shield connected to chassis and 17-pin connector shell RS232 Main Serial Interface RS422 FD 17 TX TX+

connection box. See Reference Manual for connectionmdetails. *** do not leave floating. See Reference Manual for connection details. Focus and Positioning The Matrix 120 models are factory calibrated at three focus positions (45, 70 and 125 mm for WVGA models; 45, 80 and 125 mm for MP models). Using a 2.5 mm Hex key (Allen wrench), rotate the Focus Adjustment Screw at the back of the reader to one of these three positions for your application. CAUTION: Do not rotate the Focus Adjustment Screw beyond the focus scale limits otherwise damage can occur to the focus mechanism. The following tables show the reading ranges at the three focus positions for Code 128 (1D) and Data Matrix (2D) 10 mil resolution codes: WVGA Models (Matrix 120 210-xxx) Focus Position Horizontal FOV Reading Range (DOF) 1D 2D 45 38 mm 1.5 in 30 – 80 mm 1.2 – 3.1 in 25 – 70 mm 1.0 – 2.8 in 70 56 mm 2.2 in 60 – 125 mm 2.4 – 4.9 in 45 – 100 mm 1.8 – 3.9 in 125 95 mm 3.7 in 95 – 155 mm 3.7 – 6.1 in 65 – 120 mm 2.6 – 4.7 in

Focus Position Horizontal FOV Reading Range (DOF) 1D 2D 45 40 mm 1.6 in 30 – 90 mm 1.2 – 3.5 in 30 – 80 mm 1.2 – 3.1 in 80 67 mm 2.6 in 60 – 130 mm 2.4 – 5.1 in 60 – 125 mm 2.4 – 4.9 in 125 100 mm 3.9 in 100 – 190 mm 3.9 – 7.5 in 110 – 165 mm 4.3 – 6.5 in WA Models without Polarizer (Matrix 120 311-xx0) Focus Position Horizontal FOV Reading Range (DOF) 1D 2D 45 52 mm 2.0 in 25 – 90 mm 1.0 – 3.5 in 30 – 65 mm 1.2 – 2.6 in 80 86 mm 3.4 in 65 – 145 mm 2.6 – 5.7 in 55 – 105 mm 2.2 – 4.1 in 125 130 mm 5.1 in 105 – 180 mm 4.1 – 7.1 in 80 – 125 mm 3.1 – 4.9 in The focus range is continuous to provide fine-tuning for your application CONFIGURATION

.zip file. Extract the files maintaining the folder structure and run the start.hta file to access the installation pop- up. Click on the Install DL.CODE link to run the installation program and follow the installation procedure. 2. When the installation is complete the DL.CODE entry is created in the Start>Programs bar under “Datalogic” as well as a desktop icon. Double-click the desktop icon to run it. 3. Follow the Matrix 120 Reference Manual to configure: Image lighting and code definition (Automatic or Advanced Setup) Reading Phase and Communication Channel Selection Data Collection Type Data Formatting Digital Output(s) TECHNICAL FEATURES

(10 to 30 Vdc with CBX) Consumption 0.4 to 0.1 A Max. Communication Interfaces 2400 to 115200 bit/s Main RS232 or RS422 FD USB USB 2.0 Hi-Speed Ethernet1 10/100 Mbit/s Inputs: short-circuit protected (Opto-coupled and polarity insensitive when connected through CBX) Outputs: short-circuit protected (Opto-coupled when connected through CBX) OPTICAL FEATURES (see Reference Manual for details) PHYSICAL FEATURES Serial + USB Serial + Ethernet

45.4 x 31.1 x 23.5 (1.8 x 1.2 x 1) 45.4 x 48.5 x 23.5 (1.8 x 1.9 x 1) Weight grams (ounces) 117 (4.1) with cable 200 (7.1) with cable Material Aluminium Aluminium ENVIRONMENTAL FEATURES Operating Temperature2 0 to 45 °C (32 to 113 °F) Storage Temperature -20 to 70 °C (-4 to 158 °F) Max. Humidity 90% non-condensing Vibration Resistance EN 60068- 2-6 14 mm @ 2 to 10 Hz; 1.5 mm @ 13 to 55 Hz; 2 g @ 70 to 500 Hz; 2 hours on each axis Shock Resistance EN 60068-2- 27 30g; 11 ms; 3 shocks up and 3 down on each axis Bump Resistance EN 60068-2- 29 30g; 6 ms; 5000 bumps up and 5000 down on each axis Protection Class EN 60529 IP65

Network; Green Spot; (see Reference Manual for other LEDs) Other X-PRESS™ Keypad Button (configurable via DL.CODE™), Beeper 1 the embedded Ethernet interface supports application protocols: TCP/IP, EtherNet/IP, PROFINET-IO, Modbus TCP. 2 high ambient temperature applications should use metal mounting bracket for heat dissipation.

1D and stacked 2D POSTAL Digimarc Barcode ·PDF417 · Codabar Standard and ·Code 93 Micro PDF417 Pharmacode · Code 128 · EAN-8/13 - (GS1-128) UPC-A/E · Code 39 (including (Standard and Addon 2 and Full ASCII) Addon 5) Code 32 · GS1 DataBar · MSI Family ·Standard 2 of 5 · Composite ·Matrix 2 of 5 Symbologies ·Interleaved 2 of 5 · Data Matrix ECC 200 (Standard, GS1 and Direct Marking) · QR Code (Standard and Direct Marking) · Micro QR Code · MAXICODE · Aztec Code · Australia Post · Royal Mail 4 State Customer · Kix Code · Japan Post · PLANET · POSTNET · POSTNET (+BB) · Intelligent Mail · Swedish Post DWCODE™ * Operating Mode CONTINUOUS, ONE SHOT, PHASE MODE Configuration Methods X-PRESS™ Human Machine Interface Windows-based SW (DL.CODE™) via Ethernet or Serial Interface Host Mode Programming sequences sent over Serial or Ethernet TCP interfaces Parameter Storage Permanent memory (Flash) PATENTS See www.patents.datalogic.com for patent list. This product is covered by one or more of the following patents: Matrix 120™ Design patents: EP003042845; EP003074079 Utility patents: EP0996284B1; EP0999514B1; EP1014292B1; EP1128315B1; EP1172756B1; EP1396811B1; EP1413971B1; EP1804089B1; EP2315156B1; EP2517148B1; EP2649555B1; JP4435343B2; JP4571258B2; JP5192390B2; US6512218; US6616039; US6808114, US6877664; US6997385; US7053954; US7387246; US8058600; US8113430; US8368000; US8888003; US8915443; US9268982; US9430689; ZL200680050007.8.

no routing outside the plant or building. EMC COMPLIANCE In order to meet the EMC requirements: connect reader chassis to the plant earth ground by means of a flat copper braid shorter than 100 mm; connect pin “Earth” of the CBX connection box to a good Earth Ground; POWER SUPPLY This product is intended to be installed by Qualified Personnel only. This product is intended to be connected to a UL Listed Computer (LPS or “Class 2”) which supplies power directly to the reader or a UL Listed Direct Plug-in Power Unit marked LPS or “Class 2”. EAC COMPLIANCE Customs Union: The CU Conformity certification has been achieved; this allows the Product to bear the Eurasian mark of conformity. LED SAFETY LED emission according to EN 62471 LASER SAFETY All Matrix 120s contain one aiming Laser source used to position the reader. These products conform to the applicable requirements of IEC 60825-1 and comply with 21 CFR 1040.10 except for deviations pursuant to Laser Notice N° 50, date June 24, 2007. This product is classified as a Class 1M laser product according to IEC 60825-1 regulations. WARNING: Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous visible laser light. LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LASER PRODUCT Disconnect the power supply when opening the device during maintenance or installation to avoid exposure to hazardous laser light. The laser beam can be switched on or off through a software command. CE COMPLIANCE CE marking states the compliance of the product with essential requirements listed in the applicable European directive. Since the directives and applicable standards are subject to continuous updates, and since Datalogic promptly adopts these updates, therefore the EU declaration of conformity is a living document. The EU declaration of conformity is available for competent authorities and customers through Datalogic commercial reference contacts. Since April 20th, 2016 the main European directives applicable to Datalogic products require inclusion of an adequate analysis and assessment of the risk(s). This evaluation was carried out in relation to the applicable points of the standards listed in the Declaration of Conformity. Datalogic products are mainly designed for integration purposes into more complex systems. For this reason, it is under the responsibility of the system integrator to do a new risk assessment regarding the final installation. Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference which may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a

interference at his own expense. LEGAL NOTICES © 2016 – 2019 Datalogic S.p.A. and/or its affiliates � ALL RIGHTS RESERVED. � Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. Matrix 120, DL.CODE and X-PRESS are trademarks of Datalogic S.p.A. and/or its affiliates. Digimarc® and DWCODE™ are trademarks of Digimarc Corporation. All other trademarks and brands are property of their respective owners. Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. File Downloads User Guide Matrix 120 Download [optimized] Download References datalogic.com/ patents.datalogic.com X-PRESS™ Trademark CODE™ Trademark DWCODE™ Trademark 120™ Trademark Digimarc® Trademark Related Manuals 1. Fiilex Matrix II Tunable White User Guide Fiilex Matrix II Tunable White User Guide What’s In The... 2. BLACK BIRD 4K 4×4 HDMI Matrix with HDBaseT Out User Guide BLACK BIRD 4K 4×4 HDMI Matrix INTRODUCTION This Blackbird™ device... 3. BLACK BIRD 4K Pro 4×4 HDMI True Matrix User Guide 4K Pro 4×4 HDMI® True Matrix PN 15378 < RS-232... 4. BLACK BIRD 4K 4×4 HDBaseT Matrix with 3 Receivers User Guide BLACK BIRD 4K 4×4 HDBaseT Matrix with 3 Receivers User... 5. JBL Tune 120 TWS Earbuds User Manual Quick Start Guide UNE120TWS WHAT’S IN THE BOX How to... 6. LAB GRUPPEN 120 Watt Commercial Amplifier Energy Star Certification User Manual LAB GRUPPEN 120 Watt Commercial Amplifier Energy Star Certification User...