cayke back2backDESK Installation Manual
Text of cayke back2backDESK Installation Manual
• Back-to-back benching unit, full table bases
(add your own work surfaces)
• Meets BIFMA X5.5 standards
• UL 962 approved
• Integrated wire management
• Holds up to 200 lb. per worksurface
FEATURES
PRODUCT OVERVIEW
Initialization and Reset
15
Handswitch Operation
15
Programmable Handswitch Operation
15
- Change the Height Unit
16
- Adjust Height Display
16
- Save Memory Position
16
- Recall Memory Position
16
Troubleshooting
17-18
Unit Errors
17
Handswitch Errors
18
Technical Data
19
Warranty
19
Standards & Certifications
19
TABLE OF CONTENTS
TABLE OF CO
M8-1.25 Keps Nut
4
9.
M8-1.25x12mm Self Threading Screw 16
10. M8-1.25x16mm Screw
4
Qty/Package
11. M8 Split Washer
4
12. M8 Nut
4
13. M4-0.7x6mm Screw
4
14. Control Box
2
15. Handswitch
2
16. Power Cord
2
17. HAT Channel
2
(for tables equal or greater than 72")
INSTALL ONLY APPROVED WORK SURFACES
This table system does not include a work surface (desktop). Work surface must be at least ¾" thick and weigh no
more than 5 lb. per square foot (For example, a 2'x6' desktop should weigh no more than 60 lb). Do not exceed a
maximum weight for the desktop of 75 lb. To prevent table from tipping or collapsing, make sure the desk frame
is not overloaded by the
DO NOT OVERLOAD DESK
• Do not exceed maximum load (including weight of desktop) of 200 lb. (91Kg) for two-leg configuration.
• Do not exceed edge load of 25 lb. when positioning monitors or mounting accessories.
• Do not sit or stand on table
USE CARE WHEN MOVING DESK
• Clear objects and equipment from table before moving to reduce the risk of tipping over.
• Adjust the desk to its lowest height before moving
• To disco
1. Assemble the ganging bracket to the legs
2. Fasten the top supports onto the table top
3. Assemble the beams and columns to the top supports,
fasten beam to table top
4. Assemble the cable tray
5. Fasten the wire management to the ganging brackets
6. Snap on the ganging bracket covers
7.
Attach the HAT channel (for tables equal to or greater than 66")
8. Fasten the control box and hands