AJAX Systems WallSwitch Operation & User’s Manual

Updated July 23, 2020 WallSwitch is a wireless indoor power relay featuring a power consumption meter. The miniature body of the device is adapted for installation in a European-type socket. Regardless of the type of electrical circuit, only a quali�ed electrician should install WallSwitch! WallSwitch operates only within the Ajax se ...

a security company. Functional Elements IN terminals: How to create and con�gure a scenario in the Ajax security system Buy power relay WallSwitch 1. Antenna 2. Terminal blocks 3. Functional button 4. Light indicator ...

are connected to the socket or electrical appliance/system. WallSwitch closes/opens the electric circuit, controlling the power supply by the command of the security system user through the . The state of WallSwitch contacts can be switched manua ...

To pair WallSwitch with the hub: For detection and pairing to occur, the device should be located in the coverage area of the hub’s wireless network (at the same object). The connection request is transmitted only at the moment of switching on the device. 2. Install the . Create the account, ...

appear in the list of hub devices. The device statuses update depends on the ping interval set in the hub settings. The default value is 36 seconds. When switching on for the �rst time, WallSwitch contacts are open! When deleting WallSwitch from the system, contacts open! States ...

Power Current consumption in W Electric energy consumed The electric power consumed by the device connected to the relay. The counter is reset when the relay loses the power supply Firmware Device �rmware version Device ID Device identi�er Settings Setting Value First �eld Device name, can be edited Room Selectin ...

case of a voltage surge beyond the range of 184 – 253 V, in the inactive state — 0 – 500 V Scenarios Opens the menu for creating and con�guring scenarios Jeweller Signal Strength Test Switches the device to the Jeweller signal strength test mode User Manual Opens the WallSwitch User M ...

The communication range with the hub in the line of sight is up to 1,000 meters. Take this into account when choosing the location for WallSwitch. If the device has a low or unstable signal strength, use the . Installation process: Do not connect more than 3 kW load to WallSwitch. When connecting th ...

radio signal. 1 — recommended antenna location Do not shorten the antenna! Its length is optimal for operation within the used radio frequency range! During the installation and operation of WallSwitch, follow the general electrical safety rules and the requirements of electric ...

Tech specs Actuating element Electromagnetic relay The service life of the relay 200,000 switching-ons Supply voltage 110 – 230 V AC ± 10% 50/60 Hz Voltage protection For 230 V mains: max — 253 V, min — 184 V For 110 V mains: max — 126 V, min — 77 V Maximum load current 13 А Maximum current pro ...