AJAX KeyPad Plus Operation & User’s Manual

Updated May 24, 2021 KeyPad Plus is a wireless touch keypad for managing the Ajax security system with encrypted contactless cards and key fobs. Designed for indoor installation. Supports “silent alarm” when entering the . Indicates the current security mode with a LED light. Manages security modes using passwords and . Indicates ...

2. Disarmed indicator 3. indicator Night mode 4. Malfunction indicator 5. Pass/Tag Reader 6. Numeric touch button box 7. Function button 8. Reset button 9. Arm button 10. Disarm button ...

as allows activating the Night mode. You can control the security modes with KeyPad Plus using: 11. button Night mode 12. SmartBracket mounting plate (to remove the plate, slide it down) Do not tear off the perforated part of the mount. It is requ ...

Plus by sliding your hand over the touch panel from top to bottom. When it is activated, the button backlight is enabled, and the keypad beeps. The KeyPad Plus is equipped with LED indicators that show the current security mode and keypad malfunctions (if any). The s ...

and installed at the facility will not give you away in this case, but the security company and other users of the security system will be warned about the incident. Two-stage arming KeyPad Plus can participate in two-stage arming, but cannot be used as a second ...

To connect KeyPad Plus The keypad only works with one hub. When connected to a new hub, the device stops sending commands to the old hub. Once added to a new hub, KeyPad Plus is not removed from the device list of the old hub. This must be done manually through the Ajax app. KeyPa ...

KeyPad Plus is temporarily deactivated Pass/Tag reading  is enabled in KeyPad Plus settings Pass/Tag reading is disabled in KeyPad Plus settings States The states include information about the device and its operating parameters. The states of KeyPad Plus can be found in the Ajax app: Parameter ...

the security company will receive appropriate noti�cations. After sending a low battery noti�cation, the keypad can work for up to 2 months Lid The status of the device tamper, which reacts to the detachment of or damage to the body: Works via *range extender name* Displays the status of the ReX range ...

To apply the settings after the change, click the Back button Parameter Value First �eld Device name. Displayed in the list of hub devices, SMS text, and noti�cations in the event feed. To change the device name, click on the pencil icon . The name can contain up to 12 Cyrillic characters or up to 24 L ...

button): Arming without Password The option allows you to arm the system without entering a password. To do this, just click on the Arm or Night mode button Unauthorized Access Auto-Lock If active, the keypad is locked for the pre-set time if an incorrect password is entered or unveri�ed pas ...