eLEDing ePower EE850W-POE330 Quick Start Manual

Assembly (Fig. 1) • Since the battery and control board are already set up inside the control box, so the first step is install the solar panel connecters onto the control enclosure. • Adjust the solar panel holding bracket arms to match the size of the solar panel then put the solar panel on the arms and tight them by provided self-drilling screws on top and bottom (refer Fig.2, you will need a size 4mm wrench to adjust the screws on the arms). • Connect power load (IPC, Transceiver, etc.) and solar cables from the solar panel and the control enclosure. Make sure you connect them together at the right polarity and firmly. (Ch ...

EE Systems Group Inc. 12346 Valley Blvd, Suite A, El Monte, CA 91732 Phone Number: 1-877-579-3889 www.eleding.com Rev: 10/08/2019 Accessories for Customized Projects • Addable solar panel • Extendable Modular plus WH • Replaceable battery Specifications EE850W-POE330 EE8100W-POE650 Output Wattage 25 Watts Continuous Load Out (DC) POE 48VDC/0.5A or 12VDC/2A AC Load Output (option) N/A PoE Output Voltage 12V or 48V (selectable) Power Load When Fully Charged 12W Power Load for 30 Hours 12W Power Load for 60 Hours Compatible with Dusk-to-Dawn Lighting NO Conductor Cable x2 2 Feet, + & - Wire, 14AWG Solar Panel Type 50 ...