Airbi SPRING 1.1 Instruction Manual

Page 1 of 8 ...

Please read through the operating instructions carefully before you use the appliance for the first time and keep them safely for later reference. If necessary pass them on to the next owner. 1. The appliance is only to be used in the home for the purposes described in these instructions. Unauthorised use and technical modifi ...

Air inlet Side view Rear view Before first use Take out filters from appliance Intall filters and front panel in this order 1. Open the front cover 1. install Antibacterial and HEPA filter – pleas ...

2. childlock button 3. ionizer button 4. timer button 5. night mode button 6. fan speed button 7. auto mode button 8. UV lamp button Display overview 1 2 3 4 5 6 7 8 9 1. PM2.5 - particle value 2. UV lamp icon 3. AUTO mode icon 4. NIGHT mode icon 5. ionizer icon 6. child lock icon 7. filter replacem ...

this mode appliance automatically adjust fan speed level according to the degree of air pollution. PM2.5 <60 (low speed), 60<=PM2.5<150 (medium speed), PM2.5 >=150 (high speed). Night mode button The display panel and light will turn off when ...

• When you hear the appliance with a creak sound, use the brush pen as cleaning tool, regularly clean the dust around the negative ion. Particle sensor (every 2 months) • With a dry cotton swab and regular cleaning the lens to remove the moisture and smoke, remove the outer cover of particle sensor, use the dry cotton swab to cl ...

1. Pre-filter 2. Cold-catalyst filter / High effection formaldehyde removing filter 3. Antibacterial / True HEPA filter The appliance has filter change reminding function. It's set at 1500 hours. Please replace Formaldehyde/ Cold catalyst filter (no. 2) and Antibacterial/HEPA filter (no. 3) when “change” icon light up. Also pleas ...

response • Check the power cord if is plugged in. • Check the front plate cover if is covered. • Check if appliance is not in Child-lock mode. • Check if appliance is on the flat place. Air is dirty, but the indicator still show blue color. Particle sensor is dirty, you have to clea ...