Certa CT20VHGTRMA Operation & User’s Manual

For safe operation: • Keep work area clean. Cluttered areas and benches invite injuries. Ensure that no people or animals are in the working area. • Consider the work area environment. Do not expose power tools to rain. Do not use power tools in damp or wet locat ...

and adjusting wrenches are removed from the tool before turning it on. • Avoid unintentional starting. Do not carry a plugged-in tool with a finger on the switch. Be sure switch is off when plugging in. • When the tool is used outdoors, use only extension cords intended f ...

4. Front switch-handle 5. Back switch-handle 6. Battery pack Chart for Minimum Wire Size (AWG) of Extension Cords Nameplate Rating AMPS – 0 – 10.0 Total Extension Cord Length 0-7.6m 7.6-15.2m 15.2-30.4m 30.4-45.7m Wire Gauge 18 16 16 14 OVERVIEW ...

battery pack. To turn on the machine, push down the Front switch-handle (4) and Back switch-handle (5) at the same time. Releasing either of the two switch-handles will bring the machine to a sudden stop, in which case you may see sparking from from the ventilation s ...

and before cleaning. The appliance is maintenance-free. If damage is found, the appliance may only be repaired by an authorised service workshop for electric tools. Voltage DC20V No load speed 1400min-1 Blade length 510mm Cutting capacity φ16mm Weight (except accessories ...

We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com ...