EDIFIER S2000MKⅢ Operation & User’s Manual
Text of the manual
Skip to content
Manuals+
User Manuals Simplified.
EDIFIER S2000MKⅢ Powered Bookshelf Speakers User
Manual
Home » Edifier » EDIFIER S2000MKⅢ Powered Bookshelf Speakers User Manual
EDIFIER S2000MKⅢ Powered Bookshelf Speakers User Manual
Contents [ hide
1 Important safety
instruction
2 Box Contents
3 Illustration
4 Remote Control
5 Connectivity Illustration
6 Line In Input
7 Optical / Coaxial Input
8 Bluetooth Input
9 Specifications
10 Troubleshooting
11 File Downloads
12 References
13 Related Manuals
Important safety instruction
1. Please read the instructions carefully. Keep it in safe pla
falling in, exposure to rain or moisture, product not working or being dropped, etc.), the repair has to be
performed by an authorized service professional immediately.
14. Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first.
15. Never use strong acid, alkali, gasoline, alcohol, or other chemical solven
3.5mm – RCA audio cable
RCA – RCA audio cable
Fiber optic audio cable
Speaker connecting cable
Remote control
User manual
1. Volume dial/Input selection
Press to switch amongst Line in 1→Line in 2→Optical→
Coaxial→Bluetooth input
Press and hold to disconnect Bluetooth in Bluetooth input
2. Treble control
3. Bass control
4. Power switch
5. Power cable
6. Line in input
7. Optical input
8. Coaxial input
9. Connect to passive speaker
10. Connect to active speak
1. Power on/off
2. Mute
3. Remote control indicator
4. Line In input
5. Bluetooth input
Press and hold to disconnect Bluetooth
6. Previous track/next track (Bluetooth input)
7. Volume up/down
8. Pause/play (Bluetooth input)
9. Optical input
10. Coaxial input
11. Monitor mode
12. Dynamic mode
13. Classic mode
14. Vocal mode
Four modes:
MONITOR mode: features
1. Do not place the remote control in places that are hot and humid.
2. Do not charge the batteries.
3. Remove the batteries when unused for a long period of time to avoid batteries leakage.
4. The batteries should not be exposed to excessive heat such as direct sun, fire or similar.
5. Danger of explosion if batteries are incorrectly replaced. Replace
1. Connect audio source (mobile phone, tablet, etc.) to Line In 1/Line In 2 input port (note color matching) on the
rear panel of the active speaker using audio cable.
2. Press the “LINE 1/2” button on the remote control, or press the “Volume dial/Input selection” dial on the rear
panel of the active speaker, display screen will show “LINE 1” or