EDIFIER W830BT Operating Instructions Manual
Text of the manual
Before use the headphone, please read these operating instructions
carefully. Keep the operating instructions safe for future reference.
■ Features
■ Specifcations
■ Introduction
Bluetooth Version: Bluetooth V4.1
Bluetooth Profiles: HFP, HSP, A2DP, AVRCP
Audio Decoder: Qualcomm® aptX™
Operating Distance: 10m
Operating Time: About 95 hours
Charge
USB charge cable
User manual
3.5mm audio cable
I. Diagram
1. Press: volume increase /press and hold: next track
2. Multi-function key
3. Press: volume decrease/press and hold: previous track
4. micro USB charging port
5. 3.5mm audio jack
1
2
3
4
5
■ Box Content
■ Operating Instructions
II. Charge batteries
I. ON/OFF
Warning: The rechargeable batteries that provide power for this
product must be disposed properly for recycling.
Do not dispose of batteries in fire to preventing an explosion.
ON
OFF
Long press the multi-function
key for 3 seconds
Long press the multi-function
key for 3 seconds
Function
Operation
The blue light flashes qui
2. NFC connection
If your Bluetooth mobile supports NFC (Near Field Communication),
enable your mobile’s NFC function first and switch on the headset.
Then touch the NFC area of W830BT with the NFC area of your mobile
to pair your devices.
Note:
• When the mobile hibernates or is screen-locked, it cannot pair with
NFC.
• The first time you try
3. Pair another device
The headset can simultaneously connect two Bluetooth devices.
Follow the steps below:
• Pair your headset with Device 1.
• Switch off the headset. Long press the multi-function key to restart
the headset and enter pairing mode. Connect device 2.
• Now operate on the device 1. Tap the headset in Bluetooth
connection set
IV. Play music
1. Bluetooth audio mode
When the headset is connected to a mobile that supports
Qualcomm® aptX™, you may enjoy WIFI music via the headphones:
Note:
• When the headset is turned up to its maximum volume, you will
hear a prompt tone from the headset.
Operation
Tap + key
Tap - key
Long press - key
Long press + key
Tap the multi-functio
V. Restore factory setting
Headphone is under power off and charging status, press and hold the
Volume + key and volume - key simultaneously for about 3 seconds.
The blue light flashes 3 times quickly. The factory settings are restored.
Note:
Once the factory settings are restored, the pairing list of the headphone
is erased. When you power on the headph
• Do not place the product in wet places to avoid adverse effect to
internal circuits of the product.
• Do not expose the product to direct sun light or heat. High
temperature will shorten electronic components’ life, damage battery,
and cause deformation of certain plastic parts.
• Do not expose the product to excessive cold to avoid