ACO PS4515-PRO-13 Operation Manual
Text of the manual
PS4515-PRO-13 POWER SUPPLY UNIT WITH BUILT-IN VIDEO SPLITTER
OPERATION MANUAL
ACO Sp. z o.o. limited partnership, 62-002 Suchy Las, ul. Diamentowa 7, phone/ fax +48 61 843 93 72
www.aco.com.pl
Power supply unit with a built-in video splitter for up to 3 monitors (MPRO 4, 3.5, 7 or GLASS-PRO-7), dedicated
to COMO / Familio PRO system. Typically used in single family, two or three family houses, to supply the entire Typically
used in single family, two or three family construction, to supply the entire video intercom system. The
With a RJ45 connector, the twisted pair should be tightened as shown in Fig. 3, the monitor should be connected to output
1, 2 or 3, and the panel should be connected to the input. With screw connectors, they shall be connected as per Fig. 4:
power supply to terminals + 15 V DC and GND, audio/ data signal line to LINE terminal, video respectively to terminal
RJ45 plug should be tightened as per T568B standard, and signals in each line are shown in Fig. 3.
Before switching on the power supply, make sure that all connections have been made according to the diagram,
the RJ45 plugs are properly clamped and there are no short circuits between the wires.
Fig. 3. Lines set-up in RJ45 plug
Fig. 4 shows the basic COMO/Fa