Eastwood 25304 Instructions
Text of Eastwood 25304 Instructions
3. Place 11” foam-gripped handle into hole in
lever base. Be sure to seat handle fully and
snap groove into ball detent on side of hole.
4. Pull Clamp Pin (with black knob) out releasing
clamp (Fig. 3).
5. Rotate clamp upward.
6. Choose the Split Die size that you need,
insert the dies into the rectangular recess in
the tool base with the beveled counterbore
end (with sizes stamped) toward the Rotating
Die Head and the back end fi rmly against the
step
© Copyright 2013 Easthill Group, Inc. Instruction part #25304Q Rev. 3/13
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: [email protected]
PDF version of this manual is available online >> eastwood.com/25304manual
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
US and Canada: 800.345.1178 Outside US: 610.718.8335
Fa