BASI Epsilon EClipse Quick Start Manual

2701 KENT AVENUE WEST LAFAYETTE, INDIANA 47906 USA WWW.BASINC.COM Thank you for purchasing the Epsilon EClipse™. Your new BASi instrument will provide years of service for your electrochemical requirements. The Epsilon EClipse™ was fully tested electronically and with a chemical test before shipping. The chemical test procedure ( ...

POWER The Epsilon EClipse™ system requires a grounded power supply, providing either 120 or 240 V at 50/60 Hz. Before connecting the power cord, check that the indicator next to the power connection shows the correct voltage (Figure 1). FIGURE 1 POWER CONNECTION If the indicator does not show the correct voltage, DO NOT TURN POWER ...

COMPUTER CONNECTION Connect a standard USB cable (included) between any USB port on the computer and the USB port on the Epsilon EClipse™ (Figure 2). FIGURE 2 CONNECTION PORTS STARTING THE EPSILON ECLIPSE™ The most important part of starting the Epsilon EClipse™ is establishing the link between the instrument and the PC. The Ep ...

FIGURE 3. FAILED EPSILON ECLIPSE™ – PC CONNECTION MESSAGE. CELL CONNECTION The cell lead cable is the group of wires that connects the Epsilon EClipse™ to the electrodes of the electrochemical cell. If the Epsilon EClipse™ will be used with a BASi cell stand (e.g., C3, CGME, or RDE), please see the specific cell stand manuals ...