ACV Smart SL 100 Installation Operation & Maintenance

100 - 130 - 160 - 210 - 240 Installation, Operation & Maintenance Instructions for the User and the Installer A1007850 - 661Y1700 • F ...

Table of Contents GENERAL RECOMMENDATIONS ...............................................................4 Energy labelling .....................................................................................................................................................5 Rating Plate .......................................................................................................................... ...

Table of Contents STARTING UP ...........................................................................................28 Safety Instructions to Fill the Tank .....................................................................................................28 Filling .......................................................................................................................................... ...

tructions contained in this technical manual. Essential recommendations for safety • It is strictly prohibited to carry out any modifications to the appliance without the manufacturer’s prior and written agreement. • The product must be installed by a qualified engineer, in accordance with applicable local standards and regulations. • The installation must ...

User's Guide Key : 1. Control thermostat [60/80°C] - To set the domestic hot water (DHW) temperature. 2. Fuse FF 12,5 Amp - To provide an electric protection to the appliance. 3. Summer / Winter switch - To activate the heating pump of the heating system/deacti- vate the electrical heating element ( - winter position) or activate the electrical heating element/deactivate the heating system pump ( - summer ...

Appliance Description SL 100 - 130 - 160 - 210 - 240 EN 8 1 2 10 4 5 6 7 8 9 11 12 14 15 13 8 3 MODELS - SL / SLEW 100 - 130 - 160 - 210 - 240 SL : Storage water tanks, to be installed on the floor or either vertically or horizontally on the wall, that work within a heating system. SLEW : Storage water tanks, to be installed vertically on the wall, that can work within a heating system, or independently as ...

Appliance Description SLEW 100 - 130 - 160 - 210 - 240 1. Auxiliary connection DHW 2. Cold water inlet connection 3. Control thermostat 4. Flow connection (primary circuit) 5. Polyurethane foam insulation 6. Return connection (primary circuit) 7. Outer steel tank (primary circuit) 8. Manual air bleed valve (x 2 - SL Mod- els) 9. Hot water outlet connection 10. Polypropylene top lid 11. Stainless ste ...

Technical Characteristics DIMENSIONS AND MAIN CHARACTERISTICS Tank dimensions SL / SLEW 100 130 160 210 240 A mm 865 1,025 1,225 1,497 1,744 B mm 629 789 989 1,261 1,508 C mm 365 525 725 997 1,244 Empty weight Kg 49 55 65 75 87 EN 10 A B 264 C 360 325 295 145 565 A B 264 C 360 325 295 145 565 SL A B 264 C 565 360 325 295 145 A B 264 C 565 360 325 295 145 SLEW ...

Technical Characteristics Main characteristics SL/SLEW 100 130 160 210 240 Total capacity L 105 130 161 203 242 Primary capacity L 30 31 35 39 42 DHW capacity L 75 99 126 164 200 Primary connection [F] " 1 1 1 1 1 DHW connection [M] " 3/4 3/4 3/4 3/4 3/4 Auxiliary DHW loop connection [M] " 3/4 3/4 3/4 3/4 3/4 Primary pressure drop* mbar 22.6 26.8 26.8 41.6 47.3 Heating surface area m² 1.03 1.26 1.54 1.94 2 ...

Technical Characteristics Main characteristics SL 100 130 160 210 240 Rated voltage V~ 230 230 230 230 230 Rated frequency Hz 50 50 50 50 50 Max. Amp rating A 6 6 6 6 6 ELECTRICAL CHARACTERISTICS Wiring diagram 1. 230 Volt supply cord 2. Control thermostat [60/80°C] 3. Manual reset high limit thermostat [89°C max.] 4. Summer / Winter switch 5. Fuse FF 12,5 A 6. Electric heating element 7. Charging pump ...

Technical Characteristics Main characteristics SLEW 100 130 160 210 240 Rated voltage V~ 230 230 230 230 230 Rated frequency Hz 50 50 50 50 50 Electrical consumption with electrical heating element W 2,200 2,200 2,200 2,200 2,200 Rated current with electrical heating element A 10 10 10 10 10 13 EN c 2 1 t t L1 PE N M T1 T2 Br Bk Or W B Y/Gr B Y/Gr B B Gr Br B B Bk B Bk 7 3 2 4 5 6 230 V ~50Hz B Y/Gr Br 1 8 ...

Technical Characteristics PERFORMANCE DHW performance* SL / SLEW 100 130 160 210 240 Peak flow at 40 °C L/10' 236 321 406 547 700 Peak flow at 60 °C L/10' 117 161 209 272 337 Peak flow first hour at 40 °C L/60' 784 1,063 1,349 1,820 2,319 Peak flow first hour at 60 °C L/60' 384 549 689 913 1,165 Constant flow at 40 °C L/h 658 890 1,132 1,527 1,943 Constant flow at 60 °C L/h 320 465 576 769 994 Power ...

applicable standards and regulations. • If the water drawing off point is far from the tank, installing an auxiliary DHW loop can allow to get hot water more quickly at all times. Essential instructions for the correct operation of the system • The tank must be installed in a dry and protected area. • Install the appliance to ensure ...

• Hot water can burn! In the event of small amounts of hot water repeatedly being drawn off, a stratification effect can develop in the tank. The upper hot water layer may then reach very high temperatures. • ACV recommends using a pre-set thermostatic mixing valve in order to provide hot water at a maximum of 60°C. • Water heated to wash clothes, dishes and for other uses can ca ...

Installation Package • One SL/SLEW hot water tank. • One multilingual Installation, Operation and Maintenance Instructions. • One wall-mounting kit with support and flow diverter • One energy label PACKING CONTENTS All appliances are delivered, tested and packaged separately. General Remark • The hot water tank may be installed either on the floor or on a wall using the provided wall-mounting kit ...

Installation Vertical wall hung position : domestic water connections at the bottom side 1 2 Horizontal wall hung position : domestic water connections on the right side 1 2 ACV does not recommend the installation in a horizontal position, as it will increase heat-up time and reduce DHW performances. CH flow rate > 2000 l/h CH flow rate ≤ 2000 l/h CH in Air vent Flow diverter TANK INSTALLATION : SL 100 - ...

Installation TANK INSTALLATION : SLEW 100 - 130 - 160 - 210 - 240 Vertical wall hung position : domestic water connections at the bottom side SLEW SLEW Flow diverter 19 EN ...

Discharge pipe from safety valves The Building Regulation G3 requires that any discharge from an unvented system is con- veyed to where it is visible, but will not cause danger to persons in or about the building. The tundish and discharge pipes should be fi tted in accordance with the requirements and guidance notes of Building Regulation G3. The G3 Requirements and Guidance sections 3.50 - 3.63 are detailed below. For discha ...