Dahlia YO888 Assembly Instructions Manual

Depth - 28.5cm Height - 96.5cm Important – Please read these instructions fully before starting assembly Assembly Instructions - please keep for future reference Issue 1 - 12/12/17 Storage Unit YO888 464/3944 ...

Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on page 2 plastic bags and separate them into their groups. • Keep children and animals away from the work area, small parts could choke if swallowed. • Make sure you have enough space to layout the parts before starting. • During assembly do not stand or put weight on the product, this could caus ...

Please check you have all the panels listed below 1 2 3 4 5 6 9 8 7 Left Side Panel x 1 (80(w) x 26.5(d)cm) Middle Left Panel x 1 (80(w) x 26.5(d) cm) Right Side Panel x 1 (80(w) x 26.5(d) cm) Middle Right Panel x 1 (80(w) x 26.5(d) cm) Top Panel x 1 Base Panel x 1 Open Shelves x 4 (24.7(w) x 15(d) cm) Door Panel x 1 (83(w) x 24(d) cm) Adjustable Shelves x 2 (24(w) x 21(d) cm) 12 11 10 Side Back Panels x 2 (80.5(w) x 15.5(d) cm) Centr ...

Ruler – Use this ruler to help correctly identify the screws 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170 105 Components - Fittings Note: may be supplied than are required. 3 Male Camlocks x 24 Female Camlocks x 24 30mm Dowel x 8 Shelf Supports x 8 35mm Screw x 8 12mm Screw x 9 Push Catch x 1 14mm Screw x 24 14mm Screw x 16 J K L ...

insert a total of 4 x Male Camlocks B as shown. 2. Locate 2 x Open Shelves 7 onto Male Camlocks 3. Into holes shown in Side Panels 7 Insert 4 x Female Camlocks as shown. Use a screwdriver to turn the Female Camlocks Clockwise to lock For more information refer to the Using Camlocks Section A 1 7 7 2 1 7 7 1 7 7 B 1. Into Middle Left Panel 2 insert a total of 4 x Male Camlocks B ...

insert a total of 4 x Male Camlocks B as shown. 2. Locate 2 x Open Shelves 7 onto Male Camlocks 3. Into holes shown in Side Panels 7 Insert 4 x Female Camlocks as shown. Use a screwdriver to turn the Female Camlocks Clockwise to lock For more information refer to the Using Camlocks Section 3 A 7 7 B 1. Into Middle Right Panel insert a total of 4 x Male Camlocks B ...

1 2 3 and 4 insert a total of 8 x Dowels C as shown. 2. Locate Base Panel 6 onto Dowels 3. Connect Panel 6 using 8 x Screws E as shown Step 6 1. Connect 4 x Legs 12 to Base Panel 6 using 6 x Screw J per Leg 1 2 3 4 6 6 J 1 12 12 12 12 J J J J J J J 1 2 3 4 C 6 6 E 6 J 12 ...

Push Catch G using 4 x Screw K G K 5 K K K 5 1 2 3 4 10 11 10 5 K 1. Into the underside of Top Panel 5 install 8 x Male Camlocks A as shown 2. Slide Back Panels 11 and 2 x 10 into Position 3. Locate Top Panel 5 onto Panels and 4. Into holes shown in Panels 1 2 3 and 4 Insert 8 x Female Camlocks as shown. Use a screwdriver to turn the Female Camlocks Clockwise to l ...

install a total of 12 x Panel Stiffeners as shown using 12 x Screws k M 5 3 11 10 10 K M K M K M K M K M K M K M K M K M K M K M K M 5 L 2 3 9 8 9 K 1. Connect Catch Plate L to Door 8 using 1 x Screw F 2. Connect Doors 8 to Panel 2 as shown using a total of 4 x Screw F per Hinge 3. Insert 8 x Shelf Supports into holes shown 4. Place 2 x Shelves 9 onto S ...

standing, but it is recommended that the unit is secured to the wall. 1. Move the unit into desired position. 2. Mark the wall with a suitable scribe the position of the fixing hole. 3. Drill hole and insert a suitable Wall Plug, Please check the type of wall you are fixing to and for more information please see the guide to wall mounting & Fixings on the back page Warning: Before driling,check wall ...