Campbell CompactFlash CFM100 Manual 

Revision: 9/16 C o p y r i g h t © 2 0 0 0 - 2 0 1 6 C a m p b e l l S c i e n t i f i c , I n c . ...

contact information is for Canadian and international clients residing in countries served by Campbell Scientific (Canada) Corp. directly. Affiliate companies handle repairs for clients within their territories. Please visit www.campbellsci.ca to determine which Campbell Scien ...

TRIPODS, TOWERS, AND ANY ATTACHMENTS TO TRIPODS AND TOWERS SUCH AS SENSORS, CROSSARMS, ENCLOSURES, ANTENNAS, ETC. FAILURE TO PROPERLY AND COMPLETELY ASSEMBLE, INSTALL, OPERATE, USE, AND MAINTAIN TRIPODS, TOWERS, AND ATTACHMENTS, AND FAILURE TO HE ...

About this manual Please note that this manual was originally produced by Campbell Scientific Inc. (CSI) primarily for the US market. Some spellings, weights and measures may reflect this origin. Some useful conversion factors: Area: 1 in2 (square inch) = 645 mm2 Length: 1 in. (inch) = 25.4 mm 1 ft (foot) = 304.8 mm 1 yard = 0.914 m 1 mile ...

PDF viewers: These page numbers refer to the printed version of this document. Use the PDF reader bookmarks tab for links to specific sections. 1. Introduction ................................................................ 1 2. Precautions ................................................................ 1 3. Initial Inspection ......... ...

ii 7.3.2.2 Reinserting the Card ........................................................ 14 7.3.2.3 Card Swapping ................................................................ 14 Appendix A. CF Card Maintenance ............................................. A-1 A.1 Formatting CF Card ....................................................... ...

1. Introduction Campbell Scientific’s CFM100 CompactFlash® Module stores the datalogger’s data on a removable CompactFlash (CF) card. The CFM100 module connects to the datalogger via the 40-pin peripheral port. Currently, only the CR1000 and CR3000 dataloggers have the 40-pin peripheral port; the CFM100 is not compatible w ...