Balt Study Carrel 89788 Assembly Instructions Manual

1 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 123456789012345678901234567890121234567890123456789012345678901212345678901 12345678901234567890123456789012123456789012345678 ...

P1 Right Side Panel 1 EA P2 Left Side Panel 1 EA P3 Top Platform 1 EA P4 Upper Shelf Platform 1 EA P5 Back Panel 1 EA P6 Upper Leg Reciever 2 EA P7 Lower Leg Insert 2 EA Part Drawing Description Qty Part Drawing Description Qty WOW Adjustable Height Workcenter Study Carrel Hardware List A ½” Socket Screw 4 EA A1 1-½” Socket Screw 8 EA B Threaded Nut 4 EA C Wood Screw 24 EA D Plastic Grommet 2 EA E Leveling Glide 4 EA F Allen Wrench 1 EA G Cam Lock ...

and Hardware. Illustration # 1 Illustration # 2 1.) 2.) READ THROUGH INSTRUCTIONS FROM BEGINNING TO END BEFORE STARTING TO ASSEMBLE UNIT. G P4 P4 Place the Back Panel (P5) with the insert nuts facing up and install 4 each Cam Locks (G) into the large holes as shown in illustration # 2. Install 4 each Cam Posts (H) in the 4 threaded insert nuts (Pre-installed) as shown in illustration # 2. Be sure that arrow on top of Camlock (G) aligns with centerline of Edge Drilled hole. Phillips Screwdriver Centerline of Edge Drilled hole. Arrow Place the Upper Shelf Platform (P4) with the ...

Illustration # 4 H P2 P3 5.) To Secure Cam Locks, Insert Large Phillips Head Screwdriver and turn Cam Lock 1/4 turn (90 degrees) clockwise. Place the Left Side Panel (P2) with the insert nuts facing up. Install 6 each Cam Posts (H) in the 6 threaded insert nuts (Pre-installed) as shown in illustration # 3. Repeat Steps 5 & 6 for the Right Side Panel(P6). Place the Back Panel (P5) with the insert nuts facing up. Slide 1 each Upper Shelf Platform (P4) over the Cam Posts (H) as shown in illustration # 5. Secure by turning the Cam Locks (H) 1/4 Turn until they lock. Slide 1 each Top Platform (P3) over the Cam Posts (H) as shown i ...

Side Panel (P2) to the Top Platform (P-3), the Back Panel (P5), and the Upper Shelf Platform (P-4) as shown in illustration # 6. 11.) Illustration #8 Attach 2 each Metal Angle Brackets (P9) using 6 each (C) screws as shown in illustration # 8. P3 G P4 G P5 H H P2 P1 P4 P2 P1 P9 C P1 P9 C P2 P3 12.) 13.) (C) Screw #6 X ½ For Scale only (C) Screw #6 X ½ For Scale only Attach 6 each Metal Angle Brackets (P9) using 18 each (C) screws as shown in illustration # 7. Illustration #7 ...

into the Upper Leg Receivers (P6). Secure at desired height using (4) each (A) Screws as shown in illustration #10. (Tighten all the screws at this time using Allen Wrench (F)). Attach 4 each (E) Leveling Glides to the 2 each Lower Leg Inserts (P7). B A1 E 16.) 14.) 15.) Illustration #10 P7 P7 Illustration #9 Rotate the Carrel Assembly so that the Bottom Platform (P-3) is facing up. Attach 2 each Upper Receivers (P6) to the Bottom Platform (P-3) using 4 each (A1) screws as shown in illustration #9. (Finger tighten only) Attach Stability Brace(P8) to the 2 each Upper Receivers (P6) using 4 Screws (A1) and 4 Threa ...

guarantee extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal use due to defect or imperfection, the defective part or product will be replaced. Damage caused by common carriers during shipment is not included in this guarantee. This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or implied shall apply. Failure to follow instructions found in Important Information Section of Owner Sheet shall void the guarantee. Consequential or ...

1-800-749-2258 39½” 28” 8” study carrel-10/27/04 Shipping Information 5.1 Cubic Feet 92 lbs. 35½ X 22 30½ 35½ X 8¼ 12 Clearance 22 Adjustable Height 22 - 30 19½ 23 37 ...