Backflow Direct Deringer 20 Maintenance Instructions Manual

Text of Backflow Direct Deringer 20 Maintenance Instructions Manual

4X”– 6” Deringer 20/30 Maintenance Instructions

At Backflow Direct we are committed to making our products as easy to install as possible. We design for most contingencies, but installation may be different based on your regional regulations or system design. We are continually improving our products and instructions – please help us by providing rec

4X”- 6” Deringer 20/30 Maintenance Instructions

BD-INST-4X2030 | Rev A | 09/06/2019 | Copyright 2011 Backflow Direct, LLC Page 2 of 20 Tools Required: This list is the recommended tools for ease of installation. Other versions of the same tool can be used. For example, Allen Wrenches instead of Allen Drive Sockets. QUESTIONS: Please call us at 916

4X”- 6” Deringer 20/30 Maintenance Instructions

BD-INST-4X2030 | Rev A | 09/06/2019 | Copyright 2011 Backflow Direct, LLC Closing Shut-Off Valves Prior to Maintenance 1. Slowly rotate Shut-Off Valve #2 Handle (B) clockwise to the closed position. Flag perpendicular to flow (A). 2. Slowly rotate Shut-Off Valve #1 Handle (C) clockwise to the closed

4X”- 6” Deringer 20/30 Maintenance Instructions

BD-INST-02030 | Rev C | 12/22/2015 | Copyright 2011 Backflow Direct, LLC Opening Test Cocks and Bleeding All Pressure from the Line Before Maintenance 1. DO NOT OPEN Main Test Cock Number 1, as it is still subject to line pressure. 2. Using the Backflow Direct test cock wrench or a small adjustable wr

4X”- 6” Deringer 20/30 Maintenance Instructions

BD-INST-02030 | Rev C | 12/22/2015 | Copyright 2011 Backflow Direct, LLC Removing Access Port Cover Plate 1. Using a 15/16” socket wrench loosen all eight bolts on the access port cover plate (A). 2. Remove bolts and tapered washers (B) and store in a safe place. Be careful not to lose tapered washe

4X”- 6” Deringer 20/30 Maintenance Instructions

BD-INST-02030 | Rev C | 12/22/2015 | Copyright 2011 Backflow Direct, LLC Removing the First Dual-Action Check Module 1. Use a 15/16” Socket Wrench to loosen the check retainer bolts on both sides of the valve body (A). Do not completely remove check retainer bolts from valve body. Merely loosen the

Backflow Direct Control Unit Owners Instructions: