Aaronia SPECTRAN NF Manual
Text of the manual
Firmware V 1.0 / © 2005-2013 by Aaronia AG, D-54597 Euscheid, www..aaronia.com
1
Please read the following manual
carefully before starting up your
measurement device. The manual
gives you useful instructions how to
operate the unit correctly.
With your purchase of this SPECTRAN low-frequency measurement device, you
have bought professional equipment which allows you measuring low-frequen-
cy fields.
Please note: For measuring high-frequency fields (cellphones, mobile commu-
nication, RADAR, TV and others), you would need additionally one of our high-
frequency HF-SPECTRAN models.
Therefore we rec
Scope of delivery
6
3.0
LC display
7
4.0
Key layout
8
5.0
Your first measurement / Modes
9
5.1
Choosing the sensor
10
5.2
Choosing the mode of operation
11
5.3
Spectrum analysis mode
11
5.4
HOLD mode
12
5.5
The panning approach
13
5.6
Exposure limits mode
14
5.7
Audio output mode (demodulator)
16
6.0
Manual frequenc
Firmware V 1.0 / © 2005-2013 by Aaronia AG, D-54597 Euscheid, www.aaronia.com
4
Chapter
Page
8.3
Choosing the right filter (RBW)
35
8.4
Choosing the right sampletime (Sptime)
35
8.5
Measurement of electric fields and above 500kHz
36
8.6
Sensitivity
37
8.7
Measurement inaccuracy
37
8.8
The cursor and zoom features
38
8.9
DFT mode (rapid measurements
Don’t bring ever the analyzer in contact with water. Don’t use it if it is raining. The
sensitive electronic system could otherwise be damaged.
Avoid excessively high temperatures. Do not leave the device on heating radia-
tors, in direct sunlight or in your car.
Due to the high sensitivity, the sensors and display of this device are shock-sen-
sitive, t
Please check before initial operation the completeness of delivery. Reclaim mis-
sing parts immediately at Aaronia or at your Aaronia dealer.
The package should include:
(1) CD, containing this manual, MCS PC Software (Windows, MAC, Linux) and
more
(2) SPECTRAN NF Spectrum Analyzer incl. 1300mAh Battery (installed)
(3) Small aluminum transport case. When p
BARGRAPH (50 segments)
(3)
Bargraph scaling (6 number blocks)
(4)
STATUS field:
SETUP, REF, UNCALL, OVERLOAD!, NUMERIC ENTRY, MIN, MAX
LOW, HIGH, MAX-MIN, ZOOM, USB/PC
(5)
AUDIO Status field
AM/FM, LEVEL, NORM
(6)
MODE Status field:
AVG, PEAK, HOLD, TIME, MIN, MAX
(7)
MARKER block 1
(8)
Graphics display (Pixel display)
(9)
MULTIPLIC
(1) Numeric block (hotkeys)
1 = RAIL (traction power) 15-30Hz
2 = POWER (mains frequency 50Hz or 60Hz) 45-65Hz
3 = HARMON (50Hz/60Hz harmonic) 90-500Hz
4 = TCO 1 (shortend TCO frequency range 1) 500Hz-2kHz
5 = TCO 2 (TCO frequency range 2) 2kHz-400kHz
6 = SENSOR (sensor type and axis: Mag, Msta, E-Fld, Analog)
7 = DIM (H-field measurement dimension: 1D, 2D o