Milesight WS301 Operation & User’s Manual

instructions of this operating guide.  The device must not be remodeled in any way.  Do not place the device close to objects with naked flames.  Do not place the device where the temperature is below/above the operating range.  ...

1.1 Overview........................................................................................................................................... 4 1.2 Features............................. ...

1.1 Overview WS301 simply enables you to know when someone enters the office/building through a door /window or something has been moved. The minimal magnet is placed inside the portable part, while the sensor is inside the fixed part that can be attached to door/window or other objects. W S301 can be easily mounted on the doors, pa ...

Sensor: Magnet: 2.3 LED Patterns Function Action LED Indicator Door/Window Status Switch On/Off (network unregistered) Red, blink once Switch On/Off (network registered) Green, blink once Network Status Send join network requests Red, blink once Joined the network successfully Green, blink twice Tamper Detection The device is un-insta ...

3.1 NFC Configuration WS301 can be configured via a NFC supported mobile phone. 1. Pull out the battery insulating sheet to power on the device. The indicator will light up in green for 3 seconds when device turns on. 2. Download and install “Milesight ToolBox” App from Google Play or Apple Store. 3. Enable NFC on the smartphone and ...

configure the device. (Default password: 123456) 3.2 LoRaWAN Settings LoRaWAN settings are used for configuring the transmission parameters in LoRaWAN® network. Basic LoRaWAN Settings: Go to Device->Setting->LoRaWAN Settings of ToolBox App to configure join type ...

App EUI Default App EUI is 24E124C0002A0001. Application Port The port used for sending and receiving data, default port is 85. Join Type OTAA and ABP modes are available. Application Key Appkey for OTAA mode, default is 5572404C696E6B4C6F52613230313823. Device ...

Note: 1) Please contact sales for device EUI list if there are many units. 2) Please contact sales if you need random App keys before purchase. 3) Select OTAA mode if you use Milesight IoT cloud to manage devices. 4) Only OTAA mode supports rejoin mode. LoRaWAN Frequency Settings: Go to Setting->LoRa ...

For -915M model, default frequency is AU915. 3.3 General Settings Go to Device->Setting->General Settings of ToolBox App to change the reporting interval, etc. Parameters Description Reporting Interval Reporting interval of magnet, tamper and battery level to network server. Default: 1080min Note: WS301 w ...