MiFleet +Vision Quick Start Manual
Text of MiFleet +Vision Quick Start Manual
1. Remove all contents from box.
2. Verify parts list inventory (Fig. 1).
3. Open side panel of exterior facing camera using
star torque wrench.
4. Verify SIM & SD card are inserted correctly.
5. Verify all connections are tight and correct based on
figure 3 & 4 below.
1. Clean windshield - DO NOT SKIP STEP
2. Mount both cameras temporarily by pealing off 3M
sticky tape on the back and applying camera gently
to windshield in specified locations.
3. Neatly
Quick Device Setup:
1. Access your Apple or Android
play store.
2. Search for Veyes App in your
app search bar.
3. Download Veyes App using
tablet or computer to
configure camera.
4. Open Veyes App on tablet or
computer.
5. Click allow to ALL prompts
that ask for permissions.
6. Turn vehicle ignition on, device will power on into
hotspot mode. You will have 3 mins to connect to
camera. If you are unable to connect the camera,
turn ignition off and then bac