Midmark SpeedClave M7 Installation And Operation Manual

M7 SpeedClave Steam Sterilizer Introduction 5 Components 8 Operation 10 Maintenance 15 Calling for Service 16 Limited Warranty 17 RETURN TO TABLE OF CONTENTS ...

Address of Authorized Dealer Telephone # of Authorized Dealer Name of Authorized Dealer Name of Owner/Facility/Department Information that you'll need to provide for servicing Date of Purchase Serial Number Model Number RETURN TO TABLE OF CONTENTS ...

INTRODUCTION ............................................................................................... ...

OF CONTENTS SAFETY To assure safer and more reliable operation, read this manual before operating your equipment; assure that appropriate personnel are informed on the contents of this manual–this is the responsibility of the purchaser; be sure that you understand the instructions contained in this manual before attempting to operate ...

OF CONTENTS INTRODUCTION Scope and Purpose This manual covers instructions for the operation of Ritter's M7 SpeedClave® Steam Sterilizer and is intended to be used by any medical personnel responsible for operating this equipment or performing operator level maintenance. General Information Designed for use in physician's offices, clin ...

OF CONTENTS Installation INSTALLATION Place the sterilizer on a level surface to assure proper water flow. Electrical Requirements Refer to the serial number label located on the underside of the sterilizer and connect the three prong electrical supply cord to the appropriate electrical supply. Specifications Dimensions Overall length . ...

OF CONTENTS Locating Sterilizer The sterilizer must be placed on a level surface to ensure proper gravity filling of water in the chamber. If the sterilizer is going to be operated under the unusual condition of heavy duty continuous cycles, locate the sterilizer where excessive emission of steam will not damage materials and equipment ...

OF CONTENTS COMPONENTS 1. Sterilizer Door - The self-aligning door pivots on a crossarm, hinged to the body. The crossarm is spring loaded. Pressure applied by the handle securely closes the door. The door is opened by releasing handle pressure. 2. Door Handle - Swing the door handle to the left to open the door, then push handle to t ...

OF CONTENTS Components BOTTOM VIEW TOP VIEW 16 9 15 1 10 3 4 6 7 5 8 2.1 2.2 2.3 11 14 13 12 12 ...

OF CONTENTS OPERATION General Operation Information · Detailed sterilizer operating instructions are furnished with each sterilizer. Abbreviated instructions are printed on a decal on top of the unit. · Trays can be placed on the rails on top of the sterilizer for cooling. · To open door, swing door handle to the left and then push ...