Midea Eureka I5C Manual
Text of Midea Eureka I5C Manual
ROBOT VACUUM CLEANER
Please review this instruction manual before operating.
ROBOT VACUUM CLEANER
Eureka I5C
Illustration of Appliance
Introduction of Components
08
09
10
Product Operation
Installing the Side Brushes
Charging your Robot Vacuum
Introduction of Remote Control
Power ON/OFF
Clean/Pause
Using APP
Mopping
11
11
12
13
14
15
18
Product Maintenance
Trouble Shooting
Cleaning the Side Brush
Cleaning the Dust Bin, Sponge and Filter
Cleaning the Water Tank
Cleaning the Sensor and Wheel
Cleaning the Charg
When using an electrical appliance, basis precautions should always be
followed, including the following:
READ ALL THE INSTRCUTIONS BEFORE USING(THIS APPLIANCE), Failure
to follow the warnings and instructions may result in electric shock,
fire and/ or serious injury.
WARNING- To reduce the risk of fire, electric shock, or injury:
Do not use outdoors or on wet surfaces.
Do not allow to be used as a toy. Close attenttion is necessary w
Instruction manual x1
Battery x2
Remote control x1
Mop holder x1
Mopping pad x2
Side brush x2 Pairs
Power cord x1
Docking station x1
Cleaning brush x1
Spare ilter x1
Illustration of Appliance
Illustration of Appliance
Start / Pause
Bumper
Cover
Water tank
Dust bin
Power switch
Mop holder
Cover for water outlet
Brushroll cover
Brushroll
Universal wheel
Side brush
Battery cover
Dust bin
Spare Filter
Dust bin release button
Docking station
Power socket
Water tank assembly
Release button
Water inlet
Water tank
Holder
Mopping pad
Wheel
05
06
Do not use your robot on wet surfaces or surfaces with standing water. Before using
the product on a rug with tasseled edges,please fold the rug edges under.
Prepare room for cleaning, it is suggested to tidy up the room such as picking up small
objects from the floor and clearing away loose cords.
1
2
When vacuum is charging, a white light will flash on the top of the vacuum;
When charging is complete, the white light will remain const
Introduction of Remote Control
Remote control will work when within 16 feet of the robot.
10
09
Docking
Start/Pause
Spot cleaning
Suction decrease
Edge cleaning
Zig-zag cleaning
Suction increase
Vacuum will return to docking station to charge.
Start or pause cleaning. The robot will
automatically begin Smart Path cleaning.
The robot will clean a specific area in a spiral pattern.
Decreases the suction power.
Before using remote, insert the 2 included AAA
Register and login
personal account
1
1
Power ON/OFF
Using APP
Open the cover and slide power switch to on.
Clean/Pause
Clean
Ensure the power switch is in
the "ON" position.
2 To begin cleaning, use one of the options below:
a. Press the " " key to start cleaning.
b. Press the Start/Pause button on the remote.
c. Press the Start button on the APP.
The robot will enter a sleep mode if it is not used for an extended period of time. Press
the " " button