Craftsman 119.224000 Owner's Manual

Model 119.224000 CAUTION: Before using this product, read this manual and follow a!l its Safety Rules and Operating instructions. o Table of Contents ® Full One Year Warranty ® Safety instructions ® Assembly ® Getting to Know Your Bandsaw ® Adjustment ® Operation o Maintenance ® Electricam Schematic ® Troubl ...

2 Futlone year warranty. ........................................................................................................................... ...

footwear is recommended for the best footing. Always Use Safety Glasses and Wear Hearing Protection. Also use a face or dust mask if the cutting operation is dusty. Never Overreach. Keep your proper footing and balance at all times. Never Sta ...

Square...................................................... 1 LIST OF LOOSE PARTS IN BAG Item Description Q'ty. 2-1/2" Dust port .............................................. 1 Hex. Socket head ...

H_{::machine is supplied partly assembled. Prior to use, the following items have to be installed: Open stand, 2-1/2" dust port, Table, Rip Fa_co, Blade Tension Knob, Foot I;older, and Crank handle. W.#.RN_NG: To avoid injury, do not attempt to run or use this machine until all parts are assembled and working properly. a, A;:;sernbly the ...

blade ...

_,Blade tension knob _ Ig knob Motor Lock swi 4" Dust 1. CENTERING THE TABLE a. Loosen the four hex. bolts mountingthe table to the upper table trunnion. (See FIG. 11) b. Move the table sideways as required, until the saw blade runs through the center of the table insert. c. If the adjustment of "b" is not enough to center the table, loo ...

force position. If the table requires adjustment, proceed as follows: a. Using a wrench, release the flange nut on the lower table trunnion. (See FIG.14) b. Place the M5 Hex %" wrench on the hex. socket set screw and adjust untiI the table is squar ...

changing the saw blade or carrying out adjustments, switch the bandsaw off a.nd remove the power cord from the main outlet, To avoid injury to hands when handling the saw blade, wear gloves whenever necessary. a. Remove the rip fence, the guide rail, the wing nut and screw from the table. b. ()pen the u ...

a. To adjust the lower blade guides, first position the right and left roller guides relative to the blade by loosening the lock nut FIG.24 and moving the guide carrier until both roller guides are approxi- mately 1116" behind the gullets of the saw blade b. Set both roller guides to within 1/32" of the saw blade by releasing the guide ...