Milwaukee M12B3 Operator's Manual

M12™ REDLITHIUM-ION BATTERY PACKS To reduce the risk of injury, user must read and understand operator's manual. WARNING New batteries must be charged before first use. ...

CONTAINS IMPORTANT SAFETY AND OPER- ATING INSTRUCTIONS FOR THE MILWAUKEE® M12™ COMPACT CHARGER AND POW- ER SOURCE CAT. NO. M12 TC AND MILWAUKEE® M12™ LI-ION BATTERIES. 2. BEFORE USING THE BATTERY PACK AND CHARGER, READ THIS OPERATOR’S MAN- UAL, YOUR TOOL OPERATOR’S MANUAL, AND ALL LABELS ON THE BATTERY PACK, CHARGER AND TOOL. 3. CAUTION TO REDUCE THE RISK OF IN- JURY, CHARGE MILWAUKEE® M12™ RECHARGEABLE LI-ION BATTERIES ONLY IN MILWAUKEE® M12™ LI-ION CHAR- GERS. Other types of batteries may burst causing personal injury and damage. Do not wire a battery pack to a power supply plug or car cigar ...

ALL INSTRUCTIONS FOR FUTURE REFERENCE. SYMBOLOGY Volts Direct Current Amps Read Operator's Manual SPECIFICATIONS Charger Cat. No. ......................................M12 TC Input....................................................5 VDC, 2.1 A USB Output ........................................9 VDC, 1.6 A 5 VDC, 2.1 A Operating Temperature Battery and Charger ..........................4°C to 40°C (40°F to 104°F) Battery and Tool ..............................-18°C to 75°C Power Supply Cat. No. ...................4931 4605 95A Wall Plug Input Volts ...........................100 - 240 AC Battery Cat. No.................... ...

Red/Green Flashing: Damaged or Faulty Battery • During charging, press the power button to display the current charge on the fuel gauge. • USB A Port (for device charging) and DC out port (for powering heated gear) is shut down when the Micro-USB port is being used. • A fully discharged battery pack with an internal temperature in the normal range will charge in about 130 to 525 minutes, depending on the battery pack. • Heavily cycled batteries may take longer to charge completely. • After charging is complete, the continuous green light will come on. • The charger ...

- manual supplied with your charger and battery. Using with Heated Gear To insert the battery, slide the pack into the body of the battery holder. Make sure it latches securely into place. Insert the power cable (from inside the battery holder pocket) into the power cable port on the battery holder. Place the battery holder into the pocket and fasten closed. To remove the battery, push in the release buttons and pull the battery pack away from the holder. NOTE: USB A Port (for device charging) and DC out port (for powering heated gear) is shut down when the Micro-USB port is being used. Using the USB A ...