Omron H2C Manual 

Text of the manual

Motor Timer H2C

1 Motor Timer H2C Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and Application Considerations (page 12), and Safety Precautions (page 10). DIN-sized (48 x 48, 45 x 75 mm) Motor Timer with Variable Time Ranges • Five t

Motor Timer H2C

■ Accessories (Order Separately) Note: 1. Supplied with H2C-S/-SR models. 2. Y92A-48G is a finger safe terminal cover which is attached to the P3G-08 or P3GA-11 Socket. 3. Hold-down Clips are sold in sets of two. Specifications ■ Time Ranges Five time ranges are available for each timer by turning the time range selector every 60 degree

Motor Timer H2C

3 ■ Characteristics ■ Life-test Curve Accuracy of operating time ±0.5% FS max. �±1% max. at 0.2 to 6 s for the time range code B or at 0.5 to 12 s for the time range code C) Setting error ±2% FS max. Reset time 0.5 s max. Influence of voltage ±1% FS max. Influence of temperature ±2% FS max. Insulation resistance 100 MΩ min. (at 5

Motor Timer H2C

Connections ■ Terminal Arrangement Note: The connections diagrams are for when the clutch is in the excited, reset state. H2C-8 H2C(-F)/H2C-S H2C-(F)R/H2C-SR H2C-8R (B2) (B1) (22) (24) (A2) (21) (15) (A1) (18) (16) (B2)(B1) (22) (24) (A2) (15) (21) (A1) (18) (16) 6 7 8 9 10 11 1 2 3 4 5 (B2)(B1) (22) (24) (A2) (15) (21) (A1) (18) (16) 6 7

Motor Timer H2C

5 Operation ■ Timing Chart Nomenclature t t Rt Rt t Rt Rt Rt t+t' t Rt t Rt t Rt Rt Rt t+t' H2C(-F)/H2C-S H2C-(F)R/H2C-SR Rt: Resetting time Note: For the types rated at 24 and 48 VAC, the timing operation indicator is not equipped. Rt: Resetting time H2C-8R H2C-8 Power (2-7) Instantaneous contacts NC (1-4) Instantaneous contacts NO (1-3)

Motor Timer H2C

Dimensions Note: All units are in millimeters unless otherwise indicated. 44.8 x 44.8 45 +0.6 −0 45 +0.6 −0 H2C/H2C-S/H2C-R/H2C-SR/H2C-8/H2C-8R H2C-F/H2C-FR For Flush Mounting Mounting Holes For a load current of 3 A max., dimension L becomes 3 mm min. with an interval of 0 mm between timers. For a load current of 6 A max., dimension L

Motor Timer H2C

7 ■ Accessories (Order Separately) Adapter for Flush Mounting Y92F-30 Track Mounting/Front Connecting Socket 7.8 3 4.5 35.4 4 40±0.2 40±0.2 7.8 4 35.4 20.3 19 3 1.3 5 4.5 70 max. 50 max. 20.3 max. P2CF-08-E (Finger Safe Terminal Type) Conforming to VDE0106/P100 Surface Mounting Holes Two, 4.5 dia. or two, M4 50 max. 70 max. 21.5 max. P2CF

Motor Timer H2C

Track Mounting/Front Connecting Socket Back Connecting Socket 40±0.2 7.8 3 4.5 35.4 4 7.8 4 40±0.2 35.4 30 5 4.5 3 1.2 Surface Mounting Holes Two, 4.5 dia. or two, M4 70 max. 50 max. 31.2 max. P2CF-11-E (Finger Safe Terminal Type) Conforming to VDE0106/P100 70 max. 50 max. 31.2 max. P2CF-11 Eleven, M3.5 x 7.5 sems Terminal Arrangement/ In

Motor Timer H2C

9 Mounting Track Timer Hold-down Clips 4.5 15 25 25 25 25 10 10 7.3±0.15 35±0.3 27±0.15 1 4.5 15 25 25 25 25 15 10 10 35±0.3 27 24 16 29.2 1 1.5 1,000 PFP-100N2 PFP-100N, PFP-50N 1,000 (500) (see note) Note: The value shown in parentheses are for the PFP-50N. 15 (5) (see note) 50 11.5 10 6.2 1.8 1 35.5 35.3 1.8 1.3 4.8 5 16 12 44.3 34.8 1

Motor Timer H2C

Safety Precautions ■ Precautions for Safe Use Observe the following items to ensure the safe use of this product. Environmental Precautions • Store the H2C within the specified ratings. If the H2C has been stored at temperatures –10°C or lower, let it stand for 3 hours or longer at room temperature before turning ON the power supply

Other Timer Manuals