modway EEI-3900 Manual
Text of modway EEI-3900 Manual
EEI-3900 OFFICE CHAIR
Customer Service 609-256-9000︱www.modway.com
Page 1 of 4
Thank you for purchasing the MODWAY OFFICE CHAIR!
Before you start, here are some helpful advice:
1.
We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the office chair, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intend
EEI-3900 OFFICE CHAIR Customer Service 609-256-9000︱www.modway.com
Page 2 of 4
STEP 1:
1.
Please put Seat (5) upside down on a carpeted or padded surface.
2.
Attach 2 pieces of Armrests (7) to the Seat (5) by using 6 pieces of Bolts (A) as shown and use Allen
Wrench (D) to tighten all Bolts (A) clockwise as shown.
STEP 2:
Attach Chassis (4) to the Seat (5) by using 4 pieces of Bolts (B) and 4 pieces of Flat Washers (C) as
shown and use Allen Wrench (D) t
EEI-3900 OFFICE CHAIR Customer Service 609-256-9000︱www.modway.com
Page 3 of 4
STEP 3.
1.
Please put Base (1) on a carpeted or padded surface.
2.
Insert 1 piece of Castor (3) into the Base (1) as shown by hand.
3.
Repeat the same steps for the remaining 4 pieces of Castors (3).
4.
Carefully turn over the assembled Base (1) and Insert the Cylinder Column (2) as shown.
STEP 4:
Carefully turn over the assembled Seat (5) and Insert Chassis (4) into the Cylin
EEI-3900 OFFICE CHAIR Customer Service 609-256-9000︱www.modway.com
Page 4 of 4
STEP 5:
Insert Back (6) into the Chassis (4) as shown.
Your office chair is ready to be used now!
Attention:
When you use the handle to
adjust the height to be lower,
please move away your feet
from the base at the same time.