modway EEI-2932 Quick Start Manual
Text of modway EEI-2932 Quick Start Manual
Page 1 of 4
EEI–2932 LOVESEAT
Hardware:
Component:
A
Bolt M8x40mm x 12
Thank you for purchasing the MODWAY LOVESEAT!
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the loveseat, we recommend that it is assembled by two adults, on a
carpeted o
Customer Service 908-368-1025
www.modwayfurniture.com
STEP 1:
STEP 2:
Please put Left Frame (3) on a carpeted or padded area.
Insert the tenon on Chair Seat (2) into the rabbet on Left Frame (3) at first.
Insert Wooden Bar or Chair Back (1) one by one through the drilling hole.
3
2
Please insert Batyline fabric (7).
Carefully position Middle Frame (8) to the assembled Chair Back (1), Chair Seat (2) and Left Frame (3) as
shown.
Insert the tenon on Chair Ba
Customer Service 908-368-1025 www.modwayfurniture.com
STEP 3:
STEP 4:
Carefully turn over the assembled Chair Back (1), Chair Seat (2), Left Frame (3) and Middle Frame (4).
Insert the tenon on Chair Seat (2) into the rabbet on Middle Frame (8).
Next insert Wooden Bar or Chair Back (1) one by one through the drilling hole.
Insert Batyline fabric (7).
Carefully position Right Frame (4) to the assembled Chair Back (1) and Chair Seat (2) as shown.
Insert the t
Customer Service 908-368-1025 www.modwayfurniture.com
STEP 5:
STEP 6:
Insert 2 pieces of Bolt (A) into the pre-drilled holes on Chair Back (1) through the top pre-drilled holes on Left
Frame (3).
Insert 2 piece of Bolt (A) into the pre-drilled holes on Chair Seat (2) through the top pre-drilled holes on Left
Frame (3).
Insert 2 piece of Bolt (A) into the pre-drilled holes on Chair Seat (2) through the top pre-drilled holes on Middle
Frame (8).
Use Allen Wr