modway EEI-2870 Manual
Text of modway EEI-2870 Manual
EEI –2870 TABLE
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 1 of 10
Thank you for purchasing the MODWAY TABLE!
Before you start, here is some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for.
EEI –2870 TABLE
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 2 of 10
STEP 1:
Put Middle Panel (5) on a carpeted or padded surface.
Place Middle Panel (5) to Top Rail (2) as shown.
Insert 2 pieces of Bolts (A) with 2 pieces of Flat Washers (D) into the pre-drilled holes on Middle Panel (5)
through the pre-drilled holes on Top Rail (2).
Use Allen Wrench (E) to tighten Bolts (A) clockwise until secure.
EEI –2870 TABLE
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 3 of 10
STEP 3:
Put Base (6) on a carpeted or padded surface.
Place the assembled Top Rail (2), Side Panels (3)&
(4), and Middle Panel (5)
to Base (6)
as shown.
Insert 4 pieces of Bolts (A)
into the pre-drilled holes on Top Rail (2)
through the pre-drilled holes on Side Panels (3)& (4).
Use Allen Wrench (E) to tighten Bolts (A) clockwise until secure.
EEI –2870 TABLE
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 4 of 10
STEP 5:
Place the assembled Top Rail (2), Side Panels (3)& (4), Middle Panel (5), and Base (6) to Table Top (1) as
shown.
Insert 4 pieces of Nuts (B) to the end of assembled Double-End Bolts (C).
Use Allen Wrench (E) to tighten Nuts (B) clockwise until secure.
Hardware & Tools required
EEI –2870 TABLE
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 5 of 10
STEP 6:
Place Bottom Panel (7) to the assembled Table Top (1), Top Rail (2), Side Panels (3)& (4), Middle Panel (5),
and Base (6).
Insert 4 pieces of Bolts (A) with 4 pieces of Flat Washers (D) into the pre-drilled holes on Base (6) through the
pre-drilled holes on Bottom Panel (7).
Use Allen Wrench (E) to tighten Bolts (A) clockwise until secure.
Hardware & Tools requir
EEI –2870 TABLE
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 6 of 10
STEP 8:
If you want to shorten the table , please do as follows.
Open the lock on the back of the table as shown.
STEP 9:
Slide table top apart follow the arrow as shown.
EEI –2870 TABLE
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 7 of 10
STEP 10:
Lift half of Butterfly Leaf to the other half and fold the apron on butterfly leaf as shown.
STEP 11:
Fold the apron of butterfly leaf as shown.
EEI –2870 TABLE
Customer Service 908-368-1025︱www.modwayfurniture.com
Page 8 of 10
STEP 12:
Repeat the same way to fold the other side as shown.
STEP 13:
Slide table top apart follow the arrow as shown.