Mocka Vera Bar Stool Assembly Instructions
Text of Mocka Vera Bar Stool Assembly Instructions
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Vera Bar Stool
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Vera Bar Stool
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 1 x Support (J) to 2 x Legs (H) as shown. Attach 2 x Legs (H) to
2 x Frames (I) and secure with 12 x Bolts (A), 12 x Spring Washers (B)
and 12 x Flat Washers (C). Tighten with an Allen Key (D). Tighten all of
the pre-installed screws with a screwdriver.
Secure 1 x Support (J) with 4 x Large Screws (F). Tighten with a
screwdriver.
CBA
BC
Vera Bar Stool Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 1 x Seat (G) and secure with 12 x Small Screws (E). Tighten
with a screwdriver. You’re done, enjoy!
G
E
E
E
E
E
E
E
E
E
E
E
E