Mocka Mischa Assembly Instructions Manual

Text of Mocka Mischa Assembly Instructions Manual

Thank you for your purchase.

Please follow the instructions below for correct assembly. Hardware Supplied dowel x22 bolt x46 screw x28 locking nut x46 small screw x60 mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558 1 A B C D E N M L K J I H G F wedge x8 screw x8 long screw x5 screw x8 T Wall Strap Z Y X W V slide rail x6 slide rail x6 safety strap x1 screw x1 wall anchor x1 wall screw x1 washer x2 slid

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

2 1 2 Attach 5x slide rails (F) to panel [3] and secure with 15x small screws (E). Attach 5x slide rails (G) to panel [4] and secure with 15x small screws (E). Tighten with a screwdriver. 3 3 4 4 Insert 12x bolts (C) into panels [3] and [4]. Tighten with a screwdriver. G CR E F CL E E G G F F F F F G G G E E E E E E E E E E E E E E E E E E E E E E E E E

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

3 3 4 Attach panels [6], [7], [8] and [9] to panel [3] with 6x dowels (A) and secure with 6x locking nuts (D). Tighten with a screwdriver. 3 6 7 7 9 9 8 5 5 Attach 1x slide rail (F) to panel [5] as shown with 3x screws (E). Flip the panel [5], attach 1x slide rail (G) to panel [5] as shown with 3x screws (E). Tighten with a screwdriver. G CR E F CL E A

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

4 6 9 10 9 4 9 5 Slide panel [10] down along the grooves between the panels [9]. Attach panel [4] to the unit with 6x dowels (A) and secure with 6x locking nuts (D). Tighten with a screwdriver. D D A A A A D D 39 37 6 7 8

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

5 7 8 10 Slide panel [10] down along the grooves between the panels [3] and [4]. Attach panel [2] to the unit with 4x dowels (A) and secure with 4x long screws (M). Tighten with a screwdriver. 3 3 2 4 4 M M A M M A A M

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558

6 9 10 3 4 10 Attach a leg bracket (Q) to each leg [11] using 2x screws (T) and 1x long bolt (S). Tighten with a screwdriver and an Allen key (R). Attach each leg [11] to panel [2] using 4x small bolts (J) as shown. Tighten with the Allen key (R). Attach 4x felt pads (P) to the ends of the legs. Slide panel [10] down along the grooves between the panels

Mocka Indoor Furnishing Owners Instructions: