PEERLESS Smartmount ST632P Installation And Assembly Manual

• One-touch tilt for effortless positioning and adjustment of the screen • Integrated security features provide effective theft deterrence Installation and Assembly: SmartMount™ Universal Tilt Wall Mount for 22" - 40" (56 - 102 cm) LCD Flat Panel Screens Models: ST632P, ST632P-S, ST632, ST63 ...

ISSUED: 05-11-05 SHEET #: 201-9476-9 05-22-09 NOTE: Read entire instruction sheet before you start installation and assembly. Table of Contents Parts List.................................................................................................................................................................................3 Installation to ...

ISSUED: 05-11-05 SHEET #: 201-9476-9 05-22-09 I M D C E F L A B H G J K N O SWV220/BK SWV220/SI ST 632P, ST 632P-S, ST 632 ST 632-S RTFPT 632 RTFPT 632-S Description Qty Part # Part # Part # Part # A hook bracket 1 095-1346 095-4346 095-1346 095-4346 B tilt assembly 1 095-0359 095-0360 095-0359 095-0360 C adapter plate 1 095-1322 095-4322 095-132 ...

ISSUED: 05-11-05 SHEET #: 201-9476-9 05-22-09 Installation to Single Wood Stud Wall Use a stud finder to locate the edges of the stud. Use of an edge-to-edge stud finder is highly recommended. Based on its edges, draw a vertical line down the stud’s center. Place tilt assembly (B) on wall as a template, making sure that the two mounting holes a ...

ISSUED: 05-11-05 SHEET #: 201-9476-9 05-22-09 Installation to Solid Concrete or Cinder Block Make sure that tilt assembly (B) is level, use it as a template to mark two mounting holes. Drill two 5/16" (8 mm) dia. holes to a minimum depth of 2.5" (64 mm). Insert anchors (D) in holes flush with wall as shown (right). Place tilt assembly over anchor ...

ISSUED: 05-11-05 SHEET #: 201-9476-9 05-22-09 K A C J C E G C Attaching Adapter Plate to Screen with VESA 200 or 200 x 200 Mounting Pattern Attach hook bracket (A) to adapter plate (C) using four M5 x 6 mm screws (J) and #10 washers (K) as shown. 2 FOR VESA 200 MOUNTING PATTERN: Choose hole pattern as shown below. Attach adapter plate (C) to back ...

ISSUED: 05-11-05 SHEET #: 201-9476-9 05-22-09 Attaching Hook Bracket to Screen with VESA 75 or 100 Mounting Pattern FOR VESA® 75 MOUNTING PATTERN: Choose hole pattern as shown below. Attach hook bracket (A) to back of screen using four M4 x 10 mm screws (E) as shown below. *NOTE: If hole pattern is in a pocket, attach hook bracket (A) to back of ...

ISSUED: 05-11-05 SHEET #: 201-9476-9 05-22-09 Attach screen to tilt assembly (B). Tighten M5 x 6 mm screw (J or N) to lock screen to tilt assemby. For security installation tighten M5 x 6 mm socket pin screw (N) using 4 mm security driver (O) to lock screen to tilt assemby. To remove screen from mount, loosen screw (J or N) and lift screen off of ...

• Inclinación de un solo toque para permitir la colocación y el ajuste de la pantalla sin esfuerzo • Funciones integradas de seguridad proporcionan protección eficiente contra el robo Installation et assemblage: Soporte universal de pared SmartMount™ con capacidad de ...

PUBLICADO: 05-11-05 HOJA #: 201-9476-9 05-22-09 Español Español Contenido Lista de piezas......................................................................................................................................................................11 Instalación en una pared con montantes de madera ..................................... ...