PDQ 6300 Installation Instruction
Text of the manual
40" To Finished Floor
6300/6400R/RF EXIT INSTALLATION INSTRUCTION
RIM DEVICE
Phone: 833-2-PDQTEC | www.pdqlocks.com
2. SIZE DEVICE
Standard lengths are for 36" or 48" door.
Device must be cut for other lengths.
Mark length with tape – length equals
device size minus desired door size (for
30" door = cut 6" off 36" device) ensuring
a square cut.
639400 Rev0 – 12/12/21
1. PREPARE DOOR
Prepare door and frame according to
template.
Refer to trim template if installing trim.
3. INSTALL DEVICE
Install device and trim with 1/4-20 screws
from pack #639043.
Device can be surface mounted to the
door, optional sex nuts are available,
device is through bolted if using trim.
Panic
Fire
Alarm
MLR
36" Device
6"
8"
2"
3"
48" Device
12"
14"
8"
9"
Maximum cut off length:
Reinforced Steel
or Aluminum Door Surface Mount: Drill/Tap push side for 1/4-20
Solid Wood Door
Drill 1/8" Pilot Hole for #10 Wood Screw
All Others
Use optional Sex Bolts. Drill push side with
9/32" drill bit. Drill pull side with 3/8" drill bit.
Mounting Options:
639400 Rev0 – 12/12/21
6300/6400R/RF EXIT INSTALLATION INSTRUCTION
RIM DEVICE
5. INSTALL HEAD COVER
Slide head cover onto exit device
Install 4 mounting screws
6. INSTALL STRIKE
Install strike with roller toward door face
using two #10-24 pan head screws.
Adjust strike to secure door.
Install flat head locking screw by drilling
and tapping for #10-24 after final
adjustment is achieved.
4. INSTALL END CAP
Slide end cap into rail. Ensure rail is level.
Mark the centers of the slots.
Remove end cap then drill holes using the
chart from Step 3.
Reinstall end cap and fasten with screws.
