Omron A6T Series Quick Start Manual

Allows automatic mounting with DIP IC insertion machines. Washable models with seal tape are available. SMT (surface-mounted terminal) models are available. Ordering Information No. of l Flat actuated Raised actuator Flat actuated Raised actuator poles Standard With seal tape Standard With seal tape DI ...

Insulation resistance 100 MΩ min. (at 250 VDC) Contact resistance 200 mΩ max. (initial value) Dielectric strength 500 VAC for 1 min between terminals of same polarity, and between terminals of different polarity Vibration resistance Malfunction: 10 to 55 Hz, 1.5- ...

Standard/With Seal Tape A6S-�101 A6S-�102 Flat Actuated Standard With Seal Tape Raised Actuator Seal tape (t = 0.06) Raised Actuator with SMT Terminal A6S-�104 PCB Dimensions (Top View) P: pole numbers No. of poles Model A 2 A6S-2101 A6S-2102 A6S-2104 6.02 3 A6S-3101 A6S-3102 A6S-3104 8.56 4 A6S-4101 A6 ...

Automatic Soldering Bath Soldering temperature: 260°C max. Soldering time: 5 s max. for a 1.6-mm thick, single-side PCB Reflow Soldering Soldering time Soldering temperature (°C) 2 minutes max. 20 seconds max. Manual Soldering Soldering temperature: 350°C at the ti ...

the DIP Switch may be damaged or deformed, thus causing the switch mechanism to malfunction as a result. Apply an operating force not exceeding 200% of the maximum rated operating force to the DIP Switch. Set the DIP Switch incorporating slide pins with a tiny, rou ...