Ninglu AM706 Operation & Installation Manual

Text of the manual

Operation & Installation Manual

Document: NLT-AM706-SSEN Edition: V120619

Quick operating guide

 Power drops alarm There will be an alarm when one of the power supplies drops off. Press any key to mute the alarm.  [ F ] key Select display mode: Heading mode True wind mode Gust mode  [ S ] key Select wind speed unit: m/s, km/h, knots, mph.  Turn off Press ▲ ▼ at the same time to turn off. Press any key to turn on. �

Quick operating guide ................................................... 1

Introduction .................................................................... 1 System composition ........................................................ 1 Theory description ........................................................... 2 Function .......................

The Marine Anemometer AM706 is a combined instrument for wind speed

and wind direction. It can measure relative wind speed (accuracy ±5%), relative wind direction (display accuracy 10 °, output accuracy ± 1 °). With inputting GPS (RMC) data, user can choose heading, true wind, or gust mode. System composition The AM706 includes Operator un

The wind speed sensor has a rotor with three wind cups which spins as the

wind moves past the boat. The Wind speed sensor measures how fast the rotor is spinning to calculate the wind speed. The wind direction sensor has a wind vane which points in the direction that the wind is coming from. The wind direction sensor electron

Shows “ERR” when the operator unit

receives no signal or the signal is not a NMEA message. Shows “_ _ _” when the message is incorrect Shows “….” when receiving other message Power drops alarm Shows PL and buzzer warns when one of the power supplies drops Press any key to mute the alarm RMC input baud r

Output from AM706 to other marine equipments:

$--MWV,x.x,a,x.x,a,A*hh 1) Wind Angle, 0 to 360 degrees 2) Reference, R = Relative, T = True 3) Wind Speed 4) Wind Speed Unit, K/M/N 5) Status, A = Data Valid 6) Checksum Input from GPS or NMEA912 to AM706: $--RMC,hhmmss.ss,A,llll.ll,a,yyyyy.yy,a,x.x,x.x,xxxx,x.x,a*hh 1) UTC Tim

Turn on/off Press any key to turn on.

Press ▲ ▼ at the same time to turn off. Set backlight Press ▲ or ▼ to set backlight for display Select wind speed unit Press [ S ] to select the wind speed unit:(m/s, knots, km/h, mph). Choose display mode Press [ F ] to select the display mode : Heading mode shows H(Chart 1) Tru

W 196 x H202 x D 64mm

Cutting window: W169 x H169mm Weight: Operator unit 2kg, Sensor unit 10 kg Main/Emergency power supply: 24VDC (20-32V) Main power can connect to 110/220V 50/60Hz AC through an adaptor Power consumption: less than 5W (24 VDC) Sensor unit measurement: Height 838mm, activity radius 550m Operating te

Other Measuring Instruments Manuals